how to evaluate hydraulic cylinder?

To evaluate a hydraulic cylinder, you will want a couple fundamental tools these types of as a tape evaluate or calipers. Below are the steps to evaluate a hydraulic cylinder:

1. Decide the Length: Measure the over-all length of the cylinder by measuring from the middle of one particular mounting gap to the center of the opposite mounting gap. This will give you the stroke length of the cylinder.

two. Evaluate the Bore Measurement: The bore measurement refers to the interior China hydraulic cylinders supplier diameter of the cylinder barrel. It is critical to evaluate the bore accurately as it decides the pressure and ability of the cylinder. Use calipers or a micrometer to measure the diameter of the cylinder bore. Be certain that you evaluate throughout the center of the cylinder bore and not the worn or destroyed parts.

three. Evaluate the Rod Measurement: The rod dimension refers to the diameter of the piston rod. Evaluate the diameter of the rod applying calipers or a micrometer. Once again, measure across the middle of the rod and not any worn or harmed parts.

4. Measure the Rod Size: Measure the size of the piston rod from the middle of the piston to the stop of the rod.

5. Examine Mounting Form: Notice the mounting model of the cylinder, regardless of whether it is flange-mounted, clevis-mounted, or other kinds. This info is crucial when replacing or selecting a cylinder.

six. Check Seal Kind: Identify the kind of seals applied in the cylinder, this kind of as piston seals, rod seals, or wiper seals. This info is crucial when buying replacement seals.

It is significant to evaluate hydraulic cylinders precisely to assure correct in shape and functionality. If you are doubtful or need to have support, it is advised to consult with the manufacturer’s documentation or seek aid from a China hydraulic cylinders exporter professional to make sure accurate measurements and suitable substitution.

Leave a Reply

Your email address will not be published. Required fields are marked *