Tag Archives: gearbox manufacturers

China Standard G3lm Spare Part Helical Gearbox Motor cycloidal gearbox manufacturers

Product Description

Specifications
Our G3 helical gear motor products using advanced production technology. is reach the small deformation,high precision,low noise and smooth running

Model & Mark :G3LM-1:30-0.2KW-22mm
 

G3 Model code
F/L Mount mode F:Flange mounted L:Foot mounted 
M/B/S Power mode M:Standard model(motor without brake) B:Brake model (motor with brake) S:IEC input  Without character means shaft input
1:30 Speed ratio of reducer (i=5,10,15,20~~~200)
0.3kw Motor power (0.1kw 0.2kw 0.4kw 0.75kw)
22mm Output shaft Diameter (18,22,28,32,40,50mm)

 

Performance parameter                              
Normal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.2kw output shaft 18mm 22mm 28mm
actual speed ratio 4.97 10.12 15.16 20.08 24.89 30.86 39.56 49.09 62.17 79.12 98.18 104.08 120.88 165 196.43
rpm 282 138 92 70 56 45 35 29 23 18 14 13 12 8 7
NM 50Hz 6.5 12.6 19.1 26.3 32.6 38.9 50.4 63 75.6 100.8 103.9 125.4 150 200.4 250.7
60Hz 5.4 10.5 16.6 21.9 27.1 32.4 42 52.5 63 84 86.6 104.5 125 167 208.9
Fr1 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2 196

 

Output torque of IEC input reducer
Normal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.18kw Output shaft 18mm 22mm 28mm
NM 50Hz 5.9 11.4 17.2 23.6 29.3 35 45.3 56.7 68.1 90.7 93.5 112.8 135 180.3 225.6
60Hz 4.9 9.5 14.9 19.7 24.4 29.2 37.8 47.3 56.7 75.6 77.9 94 112.5 150.3 188

 

Quantity of lubricant
output shaft dia 18mm 22mm 28mm 32mm 40mm 50mm
quantity of lubricant 140 200 400 600 900 1600

G3FM 3 phase motor reducer with flange

 

Power kw Output shaft Ratio Primary outline and dimension-mount(G3LM)
A D E F J G H K P S T U V W X Y Y1
1 2
0.2 18 5/10/15/20/25 267 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
22 30/40 50/60 80/100 293 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
28 100/120 160/200 306 309.5 90 140 175 23.5 125 11 65 45 28 31 129 203 8 170 110 15

 

Defective reason analysis Solution method
Noise Knocking Gear surface damaged Contact manufacturer,replace gear set
Continual cacophony Bearing damaged Replace the damaged bearing
Periodical cacophony Particle on gear surface Check gear surface
Neigh Lack of lubricant Fill with lubricant
Intermittent cacophony Dirty lubricant Replace the new lubricant
Shake Fixed foundation shake Deflective mount on the surface Re-adjust fixed pedestal
Output shaft shake Bearing damage Replace the damaged bearing
Inner gear parts shake Gear damage Replace the damaged gear
Housing shake Defective gear assembly Re-adjust the gear set
Leakage Oil seal leakage Oil seal vulcanize Replace the damaged oil seal
Housing leakage Housing with the sand hole Replace housing with the sand hole
Housing shake O-ring damaged Replace the damaged O-ring
Over-heating Oil seal damaged Over-tighten oil seal Replace over-tighten oil seal
Over-heat housing Over-road Re-calculate load
Lack of lubricant Low lubricant Fill with lubricant
Over-heat motor 1,the temperature of environment is too high 
2,airiness is bad 
3,pressure is too high or too low
1,take measure to reduce the temperature 
2,clean out the wind passage and check the motor
  if cooling fan has been damaged 
3,adjust electrical source pressure
The motor can`t work   Electrical source haven`t been switched on  Check if the switch is contacted will,
if the fuse wise is broken or the motor down-lead is broken
The rotate speed 
of the output shaft 
is too low
  Wrong control connection outside
Over loading
Wrong ratio
Electrical source pressure too low
Over-load
Correct is on the right connection
Reduce the load
Check the rotation ratio of the cooling fan 
and output shaft by hand
Adjust electrical source pressure 
Reduce load
Motor circumrotate,
output shaft 
don`t circu mrotate
  Inner gear set damaged Please contact the manufacture to replace the gear set

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Application: Machinery, Marine, Agricultural Machinery, Industry
Function: Speed Changing, Speed Reduction, Speed Increase
Layout: Cycloidal
Samples:
US$ 69.9/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

helical gearbox

The Cyclonoidal Gearbox

Basically, the cycloidal gearbox is a gearbox that uses a cycloidal motion to perform its rotational movement. It is a very simple and efficient design that can be used in a variety of applications. A cycloidal gearbox is often used in applications that require the movement of heavy loads. It has several advantages over the planetary gearbox, including its ability to be able to handle higher loads and higher speeds.

Dynamic and inertial effects of a cycloidal gearbox

Several studies have been conducted on the dynamic and inertial effects of a cycloidal gearbox. Some of them focus on operating principles, while others focus on the mathematical model of the gearbox. This paper examines the mathematical model of a cycloidal gearbox, and compares its performance with the real-world measurements. It is important to have a proper mathematical model to design and control a cycloidal gearbox. A cycloidal gearbox is a two-stage gearbox with a cycloid disc and a ring gear that revolves around its own axis.
The mathematical model is made up of more than 1.6 million elements. Each gear pair is represented by a reduced model with 500 eigenmodes. The eigenfrequency for the spur gear is 70 kHz. The modally reduced model is a good fit for the cycloidal gearbox.
The mathematical model is validated using ABAQUS software. A cycloid disc was discretized to produce a very fine model. It requires 400 element points per tooth. It was also verified using static FEA. This model was then used to model the stiction of the gears in all quadrants. This is a new approach to modelling stiction in a cycloidal gearbox. It has been shown to produce results comparable to those of the EMBS model. The results are also matched by the elastic multibody simulation model. This is a good fit for the contact forces and magnitude of the cycloid gear disc. It was also found that the transmission accuracy between the cycloid gear disc and the ring gear is about 98.5%. However, this value is lower than the transmission accuracy of the ring gear pair. The transmission error of the corrected model is about 0.3%. The transmission accuracy is less because of the lower amount of elastic deformation on the tooth flanks.
It is important to note that the most accurate contact forces for each tooth of a cycloid gearbox are not smooth. The contact force on a single tooth starts with a linear rise and then ends with a sharp drop. It is not as smooth as the contact force on a point contact, which is why it has been compared to the contact force on an ellipse contact. However, the contact on an ellipse contact is still relatively small, and the EMBS model is not able to capture this.
The FE model for the cycloid disc is about 1.6 million elements. The most important part of the FE model is the discretization of the cycloid disc. It is very important to do the discretization of the cycloid gear disc very carefully because of the high degree of vibration that it experiences. The cycloid disc has to be discretized finely so that the results are comparable to those of a static FEA. It has to be the most accurate model possible in order to be able to accurately simulate the contact forces between the cycloid disc and the ring gear.helical gearbox

Kinematics of a cycloidal drive

Using an arbitrary coordinate system, we can observe the motion of components in a cycloidal gearbox. We observe that the cycloidal disc rotates around fixed pins in a circle, while the follower shaft rotates around the eccentric cam. In addition, we see that the input shaft is mounted eccentrically to the rolling-element bearing.
We also observe that the cycloidal disc rotates independently around the eccentric bearing, while the follower shaft rotates around an axis of symmetry. We can conclude that the cycloidal disc plays a pivotal role in the kinematics of a cycloidal gearbox.
To calculate the efficiency of the cycloidal reducer, we use a model that is based on the non-linear stiffness of the contacts. In this model, the non-linearity of the contact is governed by the non-linearity of the force and the deformation in the contact. We have shown that the efficiency of the cycloidal reducer increases as the load increases. In addition, the efficiency is dependent on the sliding velocity and the deformations of the normal load. These factors are considered as the key variables to determine the efficiency of the cycloidal drive.
We also consider the efficiency of the cycloidal reducer with the input torque and the input speed. We can calculate the efficiency by dividing the net torque in the ring gear by the output torque. The efficiency can be adjusted to suit different operating conditions. The efficiency of the cycloidal drive is increased as the load increases.
The cycloidal gearbox is a multi-stage gearbox with a small shaft oin and a big shaft. It has 19 teeth and brass washers. The outer discs move in opposition to the middle disc, and are offset by 180 deg. The middle disc is twice as massive as the outer disc. The cycloidal disc has nine lobes that move by one lobe per drive shaft revolution. The number of pins in the disc should be smaller than the number of pins in the surrounding pins.
The input shaft drives an eccentric bearing that is able to transmit the power to the output shaft. In addition, the input shaft applies forces to the cycloidal disk through the intermediate bearing. The cycloidal disk then advances in 360 deg/pivot/roller steps. The output shaft pins then move around in the holes to make the output shaft rotate continuously. The input shaft applies a sinusoidal motion to maintain the constant speed of the base shaft. This sine wave causes small adjustments to the follower shaft. The forces applied to the internal sleeves are a part of the equilibrium mechanism.
In addition, we can observe that the cycloidal drive is capable of transmitting a greater torque than the planetary gear. This is due to the cycloidal gear’s larger axial length and the ring gear’s smaller hole diameter. It is also possible to achieve a positive fit between the fixed ring and the disc, which is achieved by toothing between the fixed ring and the disc. The cycloidal disk is usually designed with a short cycloid to minimize unbalance forces at high speeds.helical gearbox

Comparison with planetary gearboxes

Compared to planetary gearboxes, the cycloidal gearbox has some advantages. These advantages include: low backlash, better overload capacity, a compact design, and the ability to perform in a wide range of applications. The cycloidal gearbox has become popular in the multi-axis robotics market. The gearbox is also increasingly used in first joints and positioners.
A cycloidal gearbox is a gearbox that consists of four basic components: a cycloid disk, an output flange, a ring gear, and a fixed ring. The cycloid disk is driven by an eccentric shaft, which advances in a 360deg/pivot/roller step. The output flange is a fixed pin disc that transmits the power to the output shaft. The ring gear is a fixed ring, and the input shaft is connected to a servomotor.
The cycloidal gearbox is designed to control inertia in highly dynamic situations. These gearboxes are generally used in robotics and positioners, where they are used to position heavy loads. They are also commonly used in a wide range of industrial applications. They have higher torque density and a low backlash, making them ideal for heavy loads.
The output flange is also designed to handle a torque of up to 500 Nm. Its rotational speed is lower than the planet gearbox, but its output torque is much higher. It is designed to be a high-performance gearbox, and it can be used in applications that need high ratios and a high level of torque density. The cycloid gearbox is also less expensive and has less backlash. However, the cycloidal gearbox has disadvantages that should be considered when designing a gearbox. The main problem is vibrations.
Compared to planetary gearboxes, cycloidal gearboxes have a smaller overall size and are less expensive. In addition, the cycloid gearbox has a large reduction ratio in one stage. In general, cycloidal gearboxes have single or two stages, with the third stage being less common. However, the cycloid gearbox is not the only type of gearbox that has this type of configuration. It is also common to find a planetary gearbox with a single stage.
There are several different types of cycloidal gearboxes, and they are often referred to as cycloidal speed reducers. These gearboxes are designed for any industry that uses servos. They are shorter than planetary gearboxes, and they are larger in diameter for the same torque. Some of them are also available with a ratio lower than 30:1.
The cycloid gearbox can be a good choice for applications where there are high rotational speeds and high torque requirements. These gearboxes are also more compact than planetary gearboxes, and are suitable for high-torque applications. In addition, they are more robust and can handle shock loads. They also have low backlash, and a higher level of accuracy and positioning accuracy. They are also used in a wide range of applications, including industrial robotics.
China Standard G3lm Spare Part Helical Gearbox Motor   cycloidal gearbox manufacturersChina Standard G3lm Spare Part Helical Gearbox Motor   cycloidal gearbox manufacturers
editor by CX 2023-05-11

China Hangzhou Fada Marine Gearbox Jt900 Jt900/1 Jt900/3 Is Suitable for Fishing, Tug and Various Engineering Boats. cycloidal gearbox manufacturers

Solution Description

HangZhou CZPT maritime gearbox JT900 JT900/1  JT900/3 Is Suited for Fishing, Tug and A variety of Engineering Boats.

FADA maritime gearbox JT900 JT900/1  JT900/3 possesses features of pace reduction, in advance and astern clutching and bearing propeller thrust. It is made of vertically offset and two-phase transmission, that includes in little in volume, gentle in bodyweight and huge in ratio.

 

 

Input speed  
Reduction ratio 12.584,thirteen.244 Trans. potential .73kw/r/min
thirteen.945 .7kw/r/min
fourteen.68 .68kw/r/min
15.forty six .66kw/r/min
fifteen.915 .64kw/r/min
16.285 .61kw/r/min
seventeen.16,17.696 .57kw/r/min
18.267 .55kw/r/min
19.078 .53kw/r/min
19.714,20.13 .5kw/r/min
Manage way Push-and-pull flexible shaft, electrically, pneumatically
Rated thrust 240KN
Center length 570mm
L×W×H 1371x1560x1910mm
Internet fat 3800kg
Flywheel Depend on motor flywheel
Bell housing No

US $10,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Marine, Agricultural Machinery
Function: Clutch, Change Drive Torque, Speed Reduction
Layout: Cycloidal
Hardness: Soft Tooth Surface
Installation: Torque Arm Type
Step: Double-Step

###

Customization:

###

Input speed  
Reduction ratio 12.584,13.244 Trans. capacity 0.73kw/r/min
13.945 0.7kw/r/min
14.68 0.68kw/r/min
15.46 0.66kw/r/min
15.915 0.64kw/r/min
16.285 0.61kw/r/min
17.16,17.696 0.57kw/r/min
18.267 0.55kw/r/min
19.078 0.53kw/r/min
19.714,20.13 0.5kw/r/min
Control way Push-and-pull flexible shaft, electrically, pneumatically
Rated thrust 240KN
Center distance 570mm
L×W×H 1371x1560x1910mm
Net weight 3800kg
Flywheel Depend on engine flywheel
Bell housing No
US $10,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Marine, Agricultural Machinery
Function: Clutch, Change Drive Torque, Speed Reduction
Layout: Cycloidal
Hardness: Soft Tooth Surface
Installation: Torque Arm Type
Step: Double-Step

###

Customization:

###

Input speed  
Reduction ratio 12.584,13.244 Trans. capacity 0.73kw/r/min
13.945 0.7kw/r/min
14.68 0.68kw/r/min
15.46 0.66kw/r/min
15.915 0.64kw/r/min
16.285 0.61kw/r/min
17.16,17.696 0.57kw/r/min
18.267 0.55kw/r/min
19.078 0.53kw/r/min
19.714,20.13 0.5kw/r/min
Control way Push-and-pull flexible shaft, electrically, pneumatically
Rated thrust 240KN
Center distance 570mm
L×W×H 1371x1560x1910mm
Net weight 3800kg
Flywheel Depend on engine flywheel
Bell housing No

The Basics of Designing a Cyclone Gearbox

Compared to conventional gearboxes, the cycloidal gearbox offers a number of advantages including a higher ratio of transmission, robustness against shock loads, and greater positioning accuracy. However, designing a cycloidal gearbox can be complicated. This article will discuss some of the basic design principles. In addition, it will cover topics such as size, position accuracy, and transmission ratios.helical gearbox

Basic design principles

Unlike a conventional ring gear, a cycloidal gearbox uses a cycloidal disc to provide torque multiplication. The output direction of the cycloidal gear disc is opposite to the rotation of the input shaft. This allows for more compact gear construction. It also allows for increased load capacity.
Cycloid drive kinematics can appear complex, but they are actually quite simple. Instead of rotating around the center of gravity like conventional gears, the cycloidal disc rotates around fixed pins. This provides a higher reduction ratio.
To reduce vibrations and noise, multiple cycloidal discs are used. This allows for uniform distribution of forces on the carrier pin devices. This also provides a better rotational balance. In addition, multiple cycloidal discs reduce the axial moment of the carrier pin devices.
The cycloidal gear disc is supported by a separate gear disc bearing. This design provides a low component count and reduces wear. This type of kinematics can also be used in an electric motor with a high power density.
The cycloidal gear disc provides a high reduction ratio, which allows for compact construction. Unlike a ring gear, the cycloidal disc has fewer teeth. It also provides a higher reduction ratio, which is advantageous for high rotational input speed applications.
Cycloid gear discs have cylindrical holes, which allow for carrier pin devices to protrude through them. This is useful because the carrier pin devices can roll along the inside wall of the cylindrical hole in the gear disc.
A load plate is also used to provide anchorage for external structures. This plate contains threaded screw holes arranged 15mm away from the center. It has a 9mm external diameter and a 3mm through hole.

Transmission ratios up to 300:1

cycloidal gearboxes are used in a wide range of applications, from machine tools to medical imaging devices. Compared to planetary gearboxes, they offer superior positioning accuracy, torsional stiffness, backlash, and fatigue performance.
Cycloid gearboxes are also capable of transmitting more torque than planetary gears. In addition, they have a lower Hertzian contact stress and higher overload protection. Cycloid gearboxes are able to provide transmission ratios up to 300:1 in a small package.
Cycloid gears also have lower backlash over extended periods, making them an ideal choice for applications with critical positioning accuracy. Cycloid gearboxes also have good wear resistance, as well as low friction. Cycloid gears are lightweight and have good torsional stiffness, making them ideal for applications with heavy loads.
Cycloid gearboxes have several different designs. They can provide transmission ratios up to 300:1 without the need for additional pre-stages. Cycloid gears also require more accurate manufacturing processes than involute gears. Cycloid gearboxes can also be used for applications that require high power consumption, and can withstand shock loads.
Cycloid gearboxes can be adapted to fit most common servomotors. They have a modular design, all-round corrosion protection, and easy installation. Cycloid gears have a radial clamping ring, which reduces inertia by up to 39%.
CZPT Precision Europe GmbH, a subsidiary of CZPT Group, has developed an innovative online configurator to simplify the configuration of gearboxes. CZPT cycloidal gearheads are precision-built, robust, and reliable. They have a two-stage reduction principle, which minimises vibration and provides even force distribution.
Cycloid gears are capable of providing transmission ratios from 30:1 to 300:1. Cycloid gearboxes can achieve high gear ratios because they require fewer moving parts, and they have a low backlash.helical gearbox

Robustness against shock loads

Unlike conventional gearboxes that are easily damaged by shock loads, the cycloidal gearbox is extremely robust. It is a versatile solution that is ideally suited for handling equipment, food manufacturing, and machine tools.
The mechanical construction of a cycloidal gearbox consists of several mechanical components. These include cycloidal wheels, bearings, transformation elements, and needles. In addition, it has high torsional stiffness and tilting moment. It is also accompanied by highly nonlinear friction characteristic.
In order to assess the robustness of the cycloidal gearbox against shock loads, a mathematical model was developed. The model was used to calculate the stress distribution on the cycloid disc. This model can be used as a basis for more complex mechanical models.
The model is based on new approach, which allows to model stiction in all quadrants of the cycloid gear. In addition, it can be applied to actuator control.
The mathematical model is presented together with the procedure for measuring the contact stress. The results are compared to the measurement performed in the real system. The model and the measurement are found to be very close to each other.
The model also allows for the analysis of different gear profiles for load distribution. In addition, it is possible to analyze contact stresses with different geometric parameters. The mesh refinement along the disc width helps to ensure an even distribution of contact forces.
The stiction breakaway speed is calculated to the motor side. The non-zero current is then derived to the input side of the gearbox. In addition, a small steady phase is modeled during the speed direction transition. The results of the simulation are compared to the measurement. The results show that the model is extremely accurate.

Positioning accuracy

Getting the correct positioning accuracy from a cycloidal gearbox is no small feat. This is because the gears are compact, and the clearances are relatively small. This means you can expect a lot of torque from your output shaft. However, this is only part of the picture. Other concerns, such as backlash, kinematic error, and loading are all important considerations.
Getting the best possible positioning accuracy from a cycloidal gearbox means choosing a reducer that is well-made and correctly configured. A properly-selected reducer will eliminate repeatable inaccuracies and provide absolute positioning accuracy at all times. In addition, this type of gearbox offers several advantages over conventional gearboxes. These include high efficiency, low backlash, and high overload protection.
Getting the correct positioning accuracy from a gearbox also involves choosing a supplier that knows what it is doing. The best vendors are those who have experience with the product, offer a wide variety, and provide support and service to ensure the product is installed and maintained correctly. Another consideration is the manufacturer’s warranty. A reputable manufacturer will offer warranties for the gearbox. The aforementioned factors will ensure that your investment in a cycloidal gearbox pays off for years to come.
Getting the correct positioning accuracy from your cycloidal gearbox involves choosing a manufacturer that specializes in this type of product. This is particularly true if you are involved in robotics, automated painting, or any other industrial process that requires the best possible accuracy. A good manufacturer will offer the latest technology, and have the expertise to help you find the best solution for your application. This will ensure your product is a success from start to finish.helical gearbox

Size

Choosing the right size of cycloidal gearbox is important for its efficient operation. However, it is not a simple task. The process involves complex machining and requires the creation of many parts. There are different sizes of cycloidal gearboxes, and a few basic rules of thumb can help you choose the right size.
The first rule of thumb for choosing the right size of cycloidal gearboxes is to use a gearbox with the same diameter of the input shaft. This means that the gearbox must be at least 5mm thick. The cycloid will also require a base and a bearing to hold the driveshaft in place. The base should be large enough to house the pins. The bearing must be the same size as the input shaft.
The next rule of thumb is to have a hole in the cycloid for the output shaft. In this way, the output will be back-drivable and has low backlash. There should be at least four to six output holes. The size of the holes should be such that the centerline of the cycloid is equal to the size of the center of the bearing.
Using a Desmos graph, you can then create the gear parameters. The number of pins should be equal to the number of teeth in the cycloidal gear, and the size of the pins should be twice the size of the gear. The radius of the pins should be equal to the value of C from Desmos, and the size of the pin circle should be equal to the R value.
The final rule of thumb is to ensure that the cycloid has no sharp edges or discontinuities. It should also have a smooth line.
China Hangzhou Fada Marine Gearbox Jt900 Jt900/1 Jt900/3 Is Suitable for Fishing, Tug and Various Engineering Boats.     cycloidal gearbox manufacturersChina Hangzhou Fada Marine Gearbox Jt900 Jt900/1 Jt900/3 Is Suitable for Fishing, Tug and Various Engineering Boats.     cycloidal gearbox manufacturers
editor by czh 2022-12-24