Tag Archives: tractor for

China Gearbox with Auxiliary Transmission and Transfer Case Assembly for Tractor Truck 4X4 4WD 4*4 with Hot selling

Solution Description

Product Description

Gearbox with Auxiliary Transmission
and Transfer Situation Assembly
for Tractor Truck 4WD  4X4 

 

 

 

Business Profile

 

Our Rewards

 

Exhibition

 

Packaging & Shipping and delivery

FAQ

US $200-3,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Four-Step

###

Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $200-3,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Four-Step

###

Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

The Cyclonoidal Gearbox

Basically, the cycloidal gearbox is a gearbox that uses a cycloidal motion to perform its rotational movement. It is a very simple and efficient design that can be used in a variety of applications. A cycloidal gearbox is often used in applications that require the movement of heavy loads. It has several advantages over the planetary gearbox, including its ability to be able to handle higher loads and higher speeds.helical gearbox

Dynamic and inertial effects of a cycloidal gearbox

Several studies have been conducted on the dynamic and inertial effects of a cycloidal gearbox. Some of them focus on operating principles, while others focus on the mathematical model of the gearbox. This paper examines the mathematical model of a cycloidal gearbox, and compares its performance with the real-world measurements. It is important to have a proper mathematical model to design and control a cycloidal gearbox. A cycloidal gearbox is a two-stage gearbox with a cycloid disc and a ring gear that revolves around its own axis.
The mathematical model is made up of more than 1.6 million elements. Each gear pair is represented by a reduced model with 500 eigenmodes. The eigenfrequency for the spur gear is 70 kHz. The modally reduced model is a good fit for the cycloidal gearbox.
The mathematical model is validated using ABAQUS software. A cycloid disc was discretized to produce a very fine model. It requires 400 element points per tooth. It was also verified using static FEA. This model was then used to model the stiction of the gears in all quadrants. This is a new approach to modelling stiction in a cycloidal gearbox. It has been shown to produce results comparable to those of the EMBS model. The results are also matched by the elastic multibody simulation model. This is a good fit for the contact forces and magnitude of the cycloid gear disc. It was also found that the transmission accuracy between the cycloid gear disc and the ring gear is about 98.5%. However, this value is lower than the transmission accuracy of the ring gear pair. The transmission error of the corrected model is about 0.3%. The transmission accuracy is less because of the lower amount of elastic deformation on the tooth flanks.
It is important to note that the most accurate contact forces for each tooth of a cycloid gearbox are not smooth. The contact force on a single tooth starts with a linear rise and then ends with a sharp drop. It is not as smooth as the contact force on a point contact, which is why it has been compared to the contact force on an ellipse contact. However, the contact on an ellipse contact is still relatively small, and the EMBS model is not able to capture this.
The FE model for the cycloid disc is about 1.6 million elements. The most important part of the FE model is the discretization of the cycloid disc. It is very important to do the discretization of the cycloid gear disc very carefully because of the high degree of vibration that it experiences. The cycloid disc has to be discretized finely so that the results are comparable to those of a static FEA. It has to be the most accurate model possible in order to be able to accurately simulate the contact forces between the cycloid disc and the ring gear.helical gearbox

Kinematics of a cycloidal drive

Using an arbitrary coordinate system, we can observe the motion of components in a cycloidal gearbox. We observe that the cycloidal disc rotates around fixed pins in a circle, while the follower shaft rotates around the eccentric cam. In addition, we see that the input shaft is mounted eccentrically to the rolling-element bearing.
We also observe that the cycloidal disc rotates independently around the eccentric bearing, while the follower shaft rotates around an axis of symmetry. We can conclude that the cycloidal disc plays a pivotal role in the kinematics of a cycloidal gearbox.
To calculate the efficiency of the cycloidal reducer, we use a model that is based on the non-linear stiffness of the contacts. In this model, the non-linearity of the contact is governed by the non-linearity of the force and the deformation in the contact. We have shown that the efficiency of the cycloidal reducer increases as the load increases. In addition, the efficiency is dependent on the sliding velocity and the deformations of the normal load. These factors are considered as the key variables to determine the efficiency of the cycloidal drive.
We also consider the efficiency of the cycloidal reducer with the input torque and the input speed. We can calculate the efficiency by dividing the net torque in the ring gear by the output torque. The efficiency can be adjusted to suit different operating conditions. The efficiency of the cycloidal drive is increased as the load increases.
The cycloidal gearbox is a multi-stage gearbox with a small shaft oin and a big shaft. It has 19 teeth and brass washers. The outer discs move in opposition to the middle disc, and are offset by 180 deg. The middle disc is twice as massive as the outer disc. The cycloidal disc has nine lobes that move by one lobe per drive shaft revolution. The number of pins in the disc should be smaller than the number of pins in the surrounding pins.
The input shaft drives an eccentric bearing that is able to transmit the power to the output shaft. In addition, the input shaft applies forces to the cycloidal disk through the intermediate bearing. The cycloidal disk then advances in 360 deg/pivot/roller steps. The output shaft pins then move around in the holes to make the output shaft rotate continuously. The input shaft applies a sinusoidal motion to maintain the constant speed of the base shaft. This sine wave causes small adjustments to the follower shaft. The forces applied to the internal sleeves are a part of the equilibrium mechanism.
In addition, we can observe that the cycloidal drive is capable of transmitting a greater torque than the planetary gear. This is due to the cycloidal gear’s larger axial length and the ring gear’s smaller hole diameter. It is also possible to achieve a positive fit between the fixed ring and the disc, which is achieved by toothing between the fixed ring and the disc. The cycloidal disk is usually designed with a short cycloid to minimize unbalance forces at high speeds.helical gearbox

Comparison with planetary gearboxes

Compared to planetary gearboxes, the cycloidal gearbox has some advantages. These advantages include: low backlash, better overload capacity, a compact design, and the ability to perform in a wide range of applications. The cycloidal gearbox has become popular in the multi-axis robotics market. The gearbox is also increasingly used in first joints and positioners.
A cycloidal gearbox is a gearbox that consists of four basic components: a cycloid disk, an output flange, a ring gear, and a fixed ring. The cycloid disk is driven by an eccentric shaft, which advances in a 360deg/pivot/roller step. The output flange is a fixed pin disc that transmits the power to the output shaft. The ring gear is a fixed ring, and the input shaft is connected to a servomotor.
The cycloidal gearbox is designed to control inertia in highly dynamic situations. These gearboxes are generally used in robotics and positioners, where they are used to position heavy loads. They are also commonly used in a wide range of industrial applications. They have higher torque density and a low backlash, making them ideal for heavy loads.
The output flange is also designed to handle a torque of up to 500 Nm. Its rotational speed is lower than the planet gearbox, but its output torque is much higher. It is designed to be a high-performance gearbox, and it can be used in applications that need high ratios and a high level of torque density. The cycloid gearbox is also less expensive and has less backlash. However, the cycloidal gearbox has disadvantages that should be considered when designing a gearbox. The main problem is vibrations.
Compared to planetary gearboxes, cycloidal gearboxes have a smaller overall size and are less expensive. In addition, the cycloid gearbox has a large reduction ratio in one stage. In general, cycloidal gearboxes have single or two stages, with the third stage being less common. However, the cycloid gearbox is not the only type of gearbox that has this type of configuration. It is also common to find a planetary gearbox with a single stage.
There are several different types of cycloidal gearboxes, and they are often referred to as cycloidal speed reducers. These gearboxes are designed for any industry that uses servos. They are shorter than planetary gearboxes, and they are larger in diameter for the same torque. Some of them are also available with a ratio lower than 30:1.
The cycloid gearbox can be a good choice for applications where there are high rotational speeds and high torque requirements. These gearboxes are also more compact than planetary gearboxes, and are suitable for high-torque applications. In addition, they are more robust and can handle shock loads. They also have low backlash, and a higher level of accuracy and positioning accuracy. They are also used in a wide range of applications, including industrial robotics.
China Gearbox with Auxiliary Transmission and Transfer Case Assembly for Tractor Truck 4X4 4WD 4*4     with Hot sellingChina Gearbox with Auxiliary Transmission and Transfer Case Assembly for Tractor Truck 4X4 4WD 4*4     with Hot selling
editor by czh 2023-01-09

Chinese price made in China – replacement parts – ep3 drive shaft Cheap Farm Mini Tractor Compact Tractor for Sale with ce certificate top quality low price

We – EPG Group the greatest agricultural gearbox and pto manufacturing unit in China with 5 diverse branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

Chinese  price  made in China - replacement parts -  ep3 drive shaft Cheap Farm Mini Tractor Compact Tractor for Sale with ce certificate top quality low price

mercedes travel shaft Our volvo xc90 generate shaft organization toyota entrance travel shaft has 2005 cadillac cts drive shaft solid john deere bush hog pto shaft financial pto seal strength, john deere pto shaft cap builds big 1000 pto adapter up huge one thousand pto shaft a driver aspect axle replacement cost technician crew contingent with higher top quality, possesses the creation assembly line of technicalization in China and best technique checking on product quality and runs marketing and advertising networks through the nation. Adhering to “Survival by High quality, Improvement by Engineering & Credit score”, The business will constantly boost item efficiency to fulfill the rising client demands in the rigorous style of operate.

Chinese Cheap Farm Mini Tractor for Sale

Technical Parameters
 

Model TL400 TL404 TL450 TL454
Driving Type 4*2 4*four four*two four*four
Engine Product XC490T XC490T XC495 XC495
Rated power(kw) 29.4 29.four 33 33
Rated Traction (kN) six.eight 9.five seven ten
Overall dimension
(L*W*H)
3650×1666×2160 3650×1666×2160
Tread Entrance(mm) 1170 1340 1170 1340
Rear(mm) 1300 1300 1300 1300
Wheelbase(mm) 1905 1965 1905 1965
Weight (kg) 1530 1700 1530 1700
Tyre Front five.fifty-sixteen 7.50-sixteen 5.fifty-16 seven.fifty-sixteen
Rear 11.2-28 eleven.2-28 11.2-28 11.2-28
PTO(RPM)   540,760
Speed (Km/h) Forward: 2.32-27.35
 Backward: 3.12-twelve.22
Others Front Ballast Weight and
 1 layer Rear Ballast Weight,air brake
CBU, PCS IN A 40’HC 4

Tractor Attributes

one.Gas usage attain upto 1 liter/hour diesel.
two. Differential lock stop rear whee EPT skidding when climbing, operating in paddy land and rainy weather.
3.Equip with double speed of PTO shaft 540/760 rpm. Adapted to different area kind.
four.Adopt complete hydraulic steering, independent gasoline tank, easy running and large mobility. 
5.Adju EPT entrance and rear tracks meet up with agricultural needs of diverse areas. Added-big h2o tank and higher capability servicing-totally free battery make the machine with best warmth-dispersion and commencing performance.
6.Can undertake to various implements,these kinds of as plough,disc plough,ratory tiller,disc harrow,and so on

Organization Profile

TANGLAND EPT Business, is a wholly-owned subsidiary of TANGLAND Team, is the skilled company for Trading & EPT Trade and cooperation. We established up branches in ZheJiang , ZheJiang and HangZhou, as nicely as overseas assembling plant, or/and displaying room and service centre, in Pakistan, UAE, and some Asian & African international locations. TANGLAND Team is a thorough business including manufacturing, assembling, Casting & Foundry, producing Casting parts, Electric Vehicle, Tractor, Gentle truck, Semi-trailer, Metal ball and Nylon 6 goods, Running an Industrial products’Information & Exchange System, the headquarter is in Ji’nan, ZheJiang , and assembling, machining & foundry and castingplants are in HangZhou, HangZhou, HangZhou and HangZhou, theInformation and Exchange system named-TANGLANDINFORMATION & Engineering Company. TANGLAND International.

 

We export 8000 sets Agricultural devices, 5000 units various light and Medium/hefty responsibility vehicles, Semi-trailers, 30,000 sets  EPT motor and Generator sets, fifteen,000 tons different Casting parts, such as Pipe and fittings, Housing, and so forth., Metal/Iron Balls, 10,000 tons Nylon 6 Twine material and Yarn in the yr 2016, we gather a whole lot of benefits for Agricultural devices, Transporting Cars, Electrical power equipments, Casting Areas and Industrial components, and get pleasure from the excellent advertising and marketing shares in One Belt & One Road international locations, accumulate the exporting, marketing and providers encounters, discovered up the Revenue+Services organization manner, cooperate with sellers, agents, fix the challenges in equipment exporting business, e.g., provider, spare parts giving, technical supporting, guarantee, and so forth., and start the assembling and localization in some marketplaces, which strengthen the acknowledge and reliability from consumers and users.

 

TANGLND Faith: To generate the worth for all the customers is the only cause for TANGLAND existence.

Workshop

Bundle

Our Services

Pre-Revenue Support

1. Inquiry and consulting help.
2. Sample testing assistance.
3.See our Manufacturing facility.

After-Sales Provider

one.Training how to set up the device, training how to use,preserve and repair the equipment.
two.Engineers available to service machinery abroad.

FAQ

Q1.What is your phrases of payment?
A:T/T sixty% as deposit,and forty% ahead of loading.we will demonstrate you the images of the products and deals before you pay out the harmony.

Q2.What your phrases of shipping and delivery?
A:EXW,FOB,CFR,CIF,L/C.

Q3.How about your delivery time?
A:Normally,it will get about twenty days after receipt of deposit payment.The specific shipping time relies upon on the things and the amount of your get.

Q4.Are you intrigued in dealership with regional organization?
A:Indeed,we are very fascinated in this enterprise.we would like to cooperate with some neighborhood partner to offer a lot more tractors in neighborhood marketplace and provide far better provider.

Q5.Do you examination all your tractors before supply?
A:Sure,we have a hundred% tractor examination and total high quality control method ahead of delivery.

Q6.How do you make our company prolonged-phrase and excellent relationship?
A:1.We maintain very good top quality,aggressive value and effective service to guarantee our buyers advantage
    2.We protect the reward of vendor or agent,in specifical time period and region.

Chinese  price  made in China - replacement parts -  ep3 drive shaft Cheap Farm Mini Tractor Compact Tractor for Sale with ce certificate top quality low price