Tag Archives: planetary reducer gearbox

China Best Sales Cycloidal Needle Pin Wheel Planetary Cyclo Drive Cycloid Gearmotor Pinwheel Gear Box Motor Speed Reducer Gearbox cycloidal drive reducer

Product Description

Cycloidal Needle Pin Wheel Planetary Cyclo Drive Cycloid Gearmotor Pinwheel Gear Box Motor Speed Reducer Gearbox

Product Description

1. Cycloidal Pin-wheel Reducer has 3 stages of ratio, single, double, and triple.
2. Structure: horizontal, vertical, double-shaft, and direct-joint with motor
3. Grease lubrication, oil leak is not possible
4. WB series cycloidal reducers have the same features and characteristics as X & B series cycloidal reducers. The difference is that WB series cycloidal reducers have smaller sizes and power
5. It is widely applicable to ceramic, drink, food, textiles, and lifting transportation industries.

Product Parameters

WB series light-duty cycloidal gearbox:
1 Stage Ratio: 9, 11, 17, 23, 29, 35, 43, 59, 71, 87
2 Stage Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849

Models	Power	Ratio	Max. Torque	Output Shaft Dia.	Input Shaft Dia.
1 Stage
WB65	0.04~0.12	9~87	25	Φ12	Φ10
WB85	0.09~0.37	9~87	60	Φ14	Φ12
WB100	0.18~0.75	9~87	120	Φ18	Φ14
WB120	0.37~1.5	9~87	180	Φ30	Φ15
WB150	0.55~3.0	9~87	250	Φ35	Φ20
2 Stage
WBE1065	0.04~0.12	121~1849	120	Φ18	Φ10
WBE1285	0.09~0.37	121~1849	180	Φ30	Φ12
WBE1510	0.18~0.75	121~1849	250	Φ35	Φ14

Product Name	XB Series Industrial Cycloidal Pin-wheel Reducer
Specifications (Model)	X series, Single	1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
	B series, Single	0, 1, 2, 3, 4, 5, 6, 7, 8
	X series, Double	42, 53, 63, 74, 84, 85, 95, 106, 116, 117
	B series, Double	20, 31, 41, 52, 53, 63, 74, 84, 85
	X series, Triple	642, 742, 842, 852, 853, 952, 953, 1063, 1164, 1174
	B series, Triple	420, 520, 530, 531, 630, 631, 741, 842
Ratio	Single	6, 7, 9, 11, 17, 23, 25, 29, 35, 43, 59, 71, 87
	Double	121, 187, 289, 391, 473, 493, 595, 731, 841, 1003, 1225, 1505, 1849, 2065, 2537, 3481, 5133
	Triple	2055~658603

Detailed Photos

Application:	Motor, Machinery, Marine, Agricultural Machinery, Agitator, Mixer, Hoisting, Mining, Conveyor, Crane
Hardness:	Hardened Tooth Surface
Installation:	Vertical or Horizontal

Samples:	US$ 300/Piece 1 Piece(Min.Order) \| Order Sample Blue or Grey

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

Developing a Mathematical Model of a Cyclone Gearbox

Compared to planetary gearboxes, cycloidal gearboxes are often seen as the ideal choice for a wide range of applications. They feature compact designs that are often low friction and high reduction ratios.

Low friction

Developing a mathematical model of a cycloidal gearbox was a challenge. The model was able to show the effects of a variety of geometric parameters on contact stresses. It was able to model stiction in all quadrants. It was able to show a clear correlation between the results from simulation and real-world measurements.
The model is based on a new approach that enables modeling stiction in all quadrants of a gearbox. It is also able to display non-zero current at standstill. Combined with a good simulation algorithm, the model can be used to improve the dynamic behaviour of a controlled system.
A cycloidal gearbox is a compact actuator used for industrial automation. This type of gearbox provides high gear ratios, low wear, and good torsional stiffness. In addition, it has good shock load capacity.
The model is based on cycloidal discs that engage with pins on a stationary ring gear. The resulting friction function occurs when the rotor begins to rotate. It also occurs when the rotor reverses its rotation. The model has two curves, one for motor and one for generator mode.
The trochoidal profile on the cycloidal disc’s periphery is required for proper mating of the rotating parts. In addition, the profile should be defined accurately. This will allow an even distribution of contact forces.
The model was used to compare the relative performance of a cycloidal gearbox with that of an involute gearbox. This comparison indicates that the cycloidal gearbox can withstand more load than an involute gearbox. It is also able to last longer. It is also able to produce high gear ratios in a small space.
The model used is able to capture the exact geometry of the parts. It can also allow a better analysis of stresses.

Compact

Unlike helical gearing, compact cycloidal gearboxes can provide higher reduction ratios. They are more compact and less weighty. In addition, they provide better positioning accuracy.
Cycloid drives provide high torque and load capacity. They are also very efficient and robust. They are ideal for applications with heavy loads or shock loads. They also feature low backlash and high torsional stiffness. Cycloid gearboxes are available in a variety of designs.
Cycloid discs are mounted on an eccentric input shaft, which drives them around a stationary ring gear. The ring gear consists of many pins, and the cycloidal disc moves one lobe for every rotation of the input shaft. The output shaft contains roller pins, which rotate around holes in the cycloidal disc.
Cycloid drives are ideally suited to heavy loads and shock loads. They have high torsional stiffness and high reduction ratios, making them very efficient. Cycloid gearboxes have low backlash and high torque and are very compact.
Cycloid gearboxes are used for a wide variety of applications, including marine propulsion systems, CNC machining centers, medical technology, and manipulation robots. They are especially useful in applications with critical positioning accuracy, such as surgical positioning systems. Cycloid gearboxes feature extremely low hysteresis loss and low backlash over extended periods of use.
Cycloid discs are usually designed with a reduced cycloid diameter to minimize unbalance forces at high speeds. Cycloid drives also feature minimal backlash, a high reduction ratio, and excellent positioning accuracy. Cycloid gearboxes also have a long service life, compared to other gear drives. Cycloid drives are highly robust, and offer higher reduction ratios than helical gear drives.
Cycloid gearboxes have a low cost and are easy to print. CZPT gearboxes are available in a wide range of sizes and can produce high torque on the output axis. helical gearbox

High reduction ratio

Among the types of gearboxes available, a high reduction ratio cycloidal gearbox is a popular choice in the automation field. This gearbox is used in applications requiring precise output and high efficiency.
Cycloid gears can provide high torque and transmit it well. They have low friction and a small backlash. They are widely used in robotic joints. However, they require special tools to manufacture. Some have even been 3D printed.
A cycloidal gearbox is typically a three-stage structure that includes an input hub, an output hub, and two cycloidal gears that rotate around each other. The input hub mounts movable pins and rollers, while the output hub mounts a stationary ring gear.
The input shaft is driven by an eccentric bearing. The disc is then pushed against the ring gear, which causes it to rotate around the bearing. As the disc rotates, the pins on the ring gear drive the pins on the output shaft.
The input shaft rotates a maximum of nine revolutions, while the output shaft rotates three revolutions. This means that the input shaft has to rotate over eleven million times before the output shaft is able to rotate. The output shaft also rotates in the opposite direction of the input shaft.
In a two-stage differential cycloidal speed reducer, the input shaft uses a crank shaft design. The crank shaft connects the first and second cycloidal gears and actuates them simultaneously.
The first stage is a cycloidal disc, which is a gear tooth profile. It has n=7 lobes on its circumference. Each lobe moves around a reference pitch circle of pins. The disc then advances in 360deg steps.
The second stage is a cycloidal disc, also known as a “grinder gear”. The teeth on the outer gear are fewer than the teeth on the inner gear. This allows the gear to be geardown based on the number of teeth.

Kinematics

Various scholars have studied the kinematics of cycloidal gearbox. They have developed various approaches to modify the tooth profile of cycloidal gears. Some of these approaches involve changing the shape of the cycloidal disc, and changing the grinding wheel center position.
This paper describes a new approach to cycloid gear profile modification. It is based on a mathematical model and incorporates several important parameters such as pressure angle, backlash, and root clearance. The study offers a new way for modification design of cycloid gears in precision reducers for robots.
The pressure angle of a tooth profile is an intersegment angle between the normal direction and the velocity direction at a meshing point. The pressure angle distribution is important for determining force transmission performance of gear teeth in meshing. The distribution trend can be obtained by calculating the equation (5).
The mathematical model for modification of the tooth profile can be obtained by establishing the relationship between the pressure angle distribution and the modification function. The dependent variable is the modification DL and the independent variable is the pressure angle a.
The position of the reference point A is a major consideration in the modification design. It ensures the force transmission performance of the meshing segment is optimal. It is determined by the smallest profile pressure angle. The position is also dependent on the type of gear that is being modified. It is also influenced by the tooth backlash.
The mathematical model governing the pressure angle distribution is developed with DL=f(a). It is a piecewise function that determines the pressure angle distribution of a tooth profile. It can also be expressed as DL=ph.
The pressure angle of a tooth is also an angle between the common normal direction at the meshing point and the rotation velocity direction of the cycloid gear. helical gearbox

Planetary gearboxes vs cycloidal gearboxes

Generally, there are two types of gearboxes that are used for motion control applications: cycloidal gearbox and planetary gearbox. Cycloid gearboxes are used for high-frequency motions, while planetary gearboxes are suitable for low-speed applications. Both are highly accurate and precise gearboxes that are capable of handling heavy loads at high cycle rates. But they have different advantages and disadvantages. So, engineers need to determine which type of gearbox is best suited for their application.
Cycloid gearboxes are commonly used in industrial automation. They provide excellent performance with ratios as low as 10:1. They offer a more compact design, higher torque density and greater overload protection. They also require less space and are less expensive than planetary gearboxes.
On the other hand, planetary gearboxes are lightweight and offer a higher torque density. They are also capable of handling higher ratios. They have a longer life span and are more precise and durable. They can be found in a variety of styles, including square-framed, round-framed and double-frame designs. They offer a wide range of torque and speed capabilities and are used for numerous applications.
Cycloid gearboxes can be manufactured with different types of cycloidal cams, including single or compound cycloidal cams. Cycloid cams are cylindrical elements that have cam followers that rotate in an eccentric fashion. The cam followers act like teeth on the internal gear. Cycloid cams are a simple concept, but they have numerous advantages. They have a low backlash over extended periods of time, allowing for more accurate positioning. They also have internal compressive stresses and an overlap factor between the rolling elements.
Planetary gearboxes are characterized by three basic force-transmitting elements: ring gear, sun gear, and planet gear. They are generally two-stage gearboxes. The sun gear is attached to the input shaft, which in turn is attached to the servomotor. The ring gear turns the sun gear and the planet gear turns the output shaft.
China Best Sales Cycloidal Needle Pin Wheel Planetary Cyclo Drive Cycloid Gearmotor Pinwheel Gear Box Motor Speed Reducer Gearbox cycloidal drive reducer
editor by CX 2023-11-21

China Standard Planetary Helical Gearbox with Higher Precision Widely for Machine Reducer Gearbox cycloidal gear reducer design

Leave a reply

Product Description

SAE/SAF Planetary gearboxs with higher precision:

1.-Planetary gearbox is a widely used industrial product, which can reduce the speed of motor and increase the output torque. Planetary reducer can be used as supporting parts in lifting, excavation, transportation, construction and other industries.

2.SAE/SAF Series Planetary Gearbox additionally adds front and rear oil seals, uses the output shaft double support structure and design of helix gear, which makes the gear meshing smoother and stable, the SAE/SAF Series can be used in various control transmission fields with servo motors. The backlash of the AE series is less than 5 arc.min and the reduction ratio covers 3~100.

The Product Advantages of Planetary Gearbox:

1.Flexible structure design, in line with various working conditions.
2.Ring gear processing technology: Using internal gear slotting machine and hobbling machine; the precision of ring gear after processing can reach GB7.
3.Hardened gear secondary scraping technology: secondary high-speed dry cutting of gear eliminates gear deformation caused by heat treatment. Gear accuracy can reach GB6.
4.Reliable backlash testing.

Shipping Cost: Estimated freight per unit.	To be negotiated

Application:	Motor, Machinery
Function:	Speed Reduction
Layout:	Cycloidal

Customization:	Available \| Customized Request

helical gearbox

The Advantages of Using a Cyclone Gearbox

Using a cycloidal gearbox to drive an input shaft is a very effective way to reduce the speed of a machine. It does this by reducing the speed of the input shaft by a predetermined ratio. It is capable of very high ratios in relatively small sizes.

Transmission ratio

Whether you’re building a marine propulsion system or a pump for the oil and gas industry, there are certain advantages to using cycloidal gearboxes. Compared to other gearbox types, they’re shorter and have better torque density. These gearboxes also offer the best weight and positioning accuracy.
The basic design of a cycloidal gearbox is similar to that of a planetary gearbox. The main difference is in the profile of the gear teeth.
Cycloid gears have less tooth flank wear and lower Hertzian contact stress. They also have lower friction and torsional stiffness. These advantages make them ideal for applications that involve heavy loads or high-speed drives. They’re also good for high gear ratios.
In a cycloidal gearbox, the input shaft drives an eccentric bearing, while the output shaft drives the cycloidal disc. The cycloidal disc rotates around a fixed ring, and the pins of the ring gear engage the holes in the disc. The pins then drive the output shaft as the disc rotates.
Cycloid gears are ideal for applications that require high gear ratios and low friction. They’re also good for applications that require high torsional stiffness and shock load resistance. They’re also suitable for applications that require a compact design and low backlash.
The transmission ratio of a cycloidal gearbox is determined by the number of lobes on the cycloidal disc. The n=n design of the cycloidal disc moves one lobe per revolution of the input shaft.
Cycloid gears can be manufactured to reduce the gear ratio from 30:1 to 300:1. These gears are suitable for high-end applications, especially in the automation industry. They also offer the best positioning accuracy and backlash. However, they require special manufacturing processes and require non-standard characteristics.

Compressive force

Compared with conventional gearboxes, the cycloidal gearbox has a unique set of kinematics. It has an eccentric bearing in a rotating frame, which drives the cycloidal disc. It is characterized by low backlash and torsional stiffness, which enables geared motion.
In this study, the effects of design parameters were investigated to develop the optimal design of a cycloidal reducer. Three main rolling nodes were studied: a cycloidal disc, an outer race and the input shaft. These were used to analyze the motion related dynamic forces, which can be used to calculate stresses and strains. The gear mesh frequency was calculated using a formula, which incorporated a correction factor for the rotating frame of the outer race.
A three-dimensional finite element analysis (FEA) study was conducted to evaluate the cycloidal disc. The effects of the size of the holes on the disc’s induced stresses were investigated. The study also looked at the torque ripple of a cycloidal drive.
The authors of this study also explored backlash distribution in the output mechanism, which took into account the machining deviations and structure and geometry of the output mechanism. The study also looked at the relative efficiency of a cycloidal reducer, which was based on a single disc cycloidal reducer with a one-tooth difference.
The authors of this study were able to deduce the contact stress of the cycloidal disc, which is calculated using the material-based contact stiffness. This can be used to determine accurate contact stresses in a cycloidal gearbox.
It is important to know the ratios needed for calculation of the bearing rate. This can be calculated using the formula f = k (S x R) where S is the volume of the element, R is the mass, k is the contact stiffness and f is the force vector. helical gearbox

Rotational direction

Unlike the conventional ring gear which has a single axis of rotation, cycloidal gearbox has three rotational axes which are parallel and are located in a single plane. A cycloidal gearbox has excellent torsional stiffness and shock load capacity. It also ensures constant angular velocity, and is used in high-speed gearbox applications.
A cycloidal gearbox consists of an input shaft, a drive member and a cycloidal disc. The disc rotates in one direction, while the input shaft rotates in the opposite direction. The input shaft eccentrically mounts to the drive member. The cycloidal disc meshes with the ring-gear housing, and the rotational motion of the cycloidal disc is transferred to the output shaft.
To calculate the rotational direction of a cycloidal gearbox, the cycloid must have the correct angular orientation and the centerline of the cycloid should be aligned with the center of the output hole. The cycloid’s shortest length should be equal to the radius of the pin circle. The cycloid’s largest radius should be the size of the bearing’s exterior diameter.
A single-stage gear will not have much space to work with, so you’ll need a multistage gear to maximize space. This is also the reason that cycloid gears are usually designed with a shortened cycloid.
To calculate the most efficient tooth profile for a cycloidal gear, a new method was devised. This method uses a mathematical model that uses the cycloid’s rotational direction and a few other geometric parameters. Using a piecewise function related to the distribution of pressure angle, the cycloid’s most efficient profile is determined. It is then superimposed on the theoretical profile. The new method is much more flexible than the conventional method, and can adapt to changing trends of the cycloidal profile.

Design

Several designs of cycloidal gearboxes have been developed. These gearboxes have a large reduction ratio in one stage. They are mainly used for heavy machines. They provide good torsional stiffness and shock load capacity. However, they also have vibrations at high RPM. Several studies have been conducted to find a solution to this problem.
A cycloidal gearbox is designed by calculating the reduction ratio of a mechanism. This ratio is obtained by the size of the input speed. This is then multiplied by the reduction ratio of the gear profile.
The most important factor in the design of a cycloidal gearbox is the load distribution along the width of the gear. Using this as a design criterion, the amplitude of vibration can be reduced. This will ensure that the gearbox is working properly. In order to generate proper mating conditions, the trochoidal profile on the cycloidal disc periphery must be defined accurately.
One of the most common forms of cycloidal gears is circular arc toothing. This is the most common type of toothing used today.
Another form of gear is the hypocycloid. This form requires the rolling circle diameter to be equal to half the base circle diameter. Another special case is the point tooth form. This form is also called clock toothing.
In order to make this gear profile work, the initial point of contact must remain fixed to the edge of the rolling disk. This will generate the hypocycloid curve. The curve is traced from this initial point.
To investigate this gear profile, the authors used a 3D finite element analysis. They used the mathematical model of gear manufacturing that included kinematics parameters, output moment calculations, and machining steps. The resulting design eliminated backlash. helical gearbox

Sizing and selection

Choosing a gearbox can be a complex task. There are many factors that need to be taken into account. You need to determine the type of application, the required speed, the load, and the ratio of the gearbox. By gaining this information, you can find a solution that works best for you.
The first thing you need to do is find the proper size. There are several sizing programs available to help you determine the best gearbox for your application. You can start by drawing a cycloidal gear to help you create the part.
During sizing, it is important to consider the environment. Shock loads, environmental conditions, and ambient temperatures can increase wear on the gear teeth. The temperature also has a significant impact on lubrication viscosities and seal materials.
You also need to consider the input and output speed. This is because the input speed will change your gearbox ratio calculations. If you exceed the input speed, you can damage the seals and cause premature wear on the shaft bearings.
Another important aspect of sizing is the service factor. This factor determines the amount of torque the gearbox can handle. The service factor can be as low as 1.4, which is sufficient for most industrial applications. However, high shock loads and impact loads will require higher service factors. Failure to account for these factors can lead to broken shafts and damaged bearings.
The output style is also important. You need to determine if you want a keyless or keyed hollow bore, as well as if you need an output flange. If you choose a keyless hollow bore, you will need to select a seal material that can withstand the higher temperatures.
China Standard Planetary Helical Gearbox with Higher Precision Widely for Machine Reducer Gearbox cycloidal gear reducer design
editor by CX 2023-05-30

China High Precision Low Noise Helical Gear Right Angle Planetary Speed Reducer Gearbox For Servo Motor cvt gearbox

Leave a reply

Warranty: 1 year
Applicable Industries: Production Plant, Foods & Beverage Manufacturing facility, Vitality & Mining, Hotels, Garment Retailers, Constructing Content Stores, Machinery Restore Outlets, Farms, Restaurant, Property Use, Retail, Meals Store, Printing Retailers, Design works , Foods & Beverage Stores, Other, Marketing Company, Other
Bodyweight (KG): 2.5 KG
Custom-made assist: OEM, ODM
Gearing Arrangement: Cycloidal
Output Torque: fifty~6 03size 120x175x123mm or picket case.
Port: ZheJiang

Details Images 1. Use Ansys Technological innovation To Execute Finite Element Analysis On The Strength Of The Gears, And At The Very same Time, Trim The Tooth Profile And Guide Of The Helical Tooth Surface area To Minimize The Impact And Sound In the course of Gear Meshing And Enhance The Services Lifestyle Of The Equipment Practice.Life2. The Equipment Materials Is Created Of Large-quality Minimal-carbon Alloy Steel. Following Carburizing And Quenching, It Reaches About Hrc60. It Is Processed By Higher-precision Equipment Tools To Make certain That The Accuracy Of The Equipment Is Under Iso 5, So As To Obtain The Ideal High quality.Abrasion And Influence Resistance3. The Ring Equipment And The Output Flange Are Made In An Built-in Way, Using Large-good quality Metal And Fashioned By Very hot Forging, So As To Get A Large Materials Density. The Built-in Style Can Make certain That All Geometric Proportions Can Be Formed At One particular Time, And OtherCompared With The Developed-in And Clip-on Structures, It Has Increased Precision And Strength4. The Planetary Wheel Bearing Adopts Complete Needle Roller Bearing Without having Cage, Which Raises The Output Torque And Rigidity Of The Reducer5. The Cage-variety Earth Carrier And The Output Shaft Are Built-in, And The Bearings At Equally Ends Are Supported To Guarantee Greater Energy And Precision6. The Input Shaft And The Motor Are Clamped By Break up Type, Right after Dynamic Equilibrium Examination, To Guarantee The Coaxiality And Zero Backlash Electricity Transmission At Higher Enter Speed7. Use Fully Synthetic Grease And Seal Layout According To Ip65 Safety Quality To Ensure That The Lubricating Oil Does Not Leak And Is Upkeep-cost-free.

High Precision Lower Sound Helical Gear Right Angle Planetary Speed Reducer Gearbox For Servo Motor
Stage	One Phase	Two Stage
Reduction Ratio	3,4,5,8,ten	16, Delta 7.5kW 400V Servo Motor Kits ECMA-L11875R3+ ASD-A2-7543-MELU 7.5KW 400V forty seven.74N.M twenty,25,28,32,40,50
Length	A80	A89
Rated Input Pace	3000	3000
Maximum Input Velocity	4500	4500
Maximum Radial Power	280	320
Maximum Axial Force	200	240
No-load Torque	0.2	0.two
Full Load Performance	90	88
Return Clearance	≤7	≤10
Noise	≤62	≤62
Weight	0.seven	1
Average Lifespan	20000
Torsional Rigidity	1.three
Lubrication Strategy	long-phrase
Turn About	Input/Output Syntropy
Protection Stage	IP65
Installation Approach	Arbitrairily

Skilled Device Exhibit Our Companies East Ai has a effective crew which has inddependent design and style advancement of pneumatic elements from solution style to peoduction operations In case the solution does not fulfill your anticipations, we offering a sampling support ,offering you the prospect to appropriately assess items ahead of you buy. In purchase to satisfy higher needs from consumers around the globe ,we import premiere equipment from designed nations East AI has esrablished stringent top quality administration method , from variety of uncooked material to factors screening If you want your items to get qualified (CE/BV/ISO/RoHS/SGS etc). please truly feel cost-free to speak to us for detailed dialogue. Packing is 1 part of our occupation. we provide point out of the artwork packing .to deliver your merchandise securely and securely. Packing & Shipping Packing Particulars :Internal brown craft paper/exterior carton/wooden pallets.Shipping Information : 20-25 days after obtained the payment. FAQ Q1: Are You Manufacture or Trade Company? A1: We are manufacture,we have 10 years encounter for provide Steel substance and merchandise in domestic.Q2: How can we promise top quality? A2: Often a pre-manufacturing sample just before mass productionAlways closing Inspection ahead of shipmentQ3: What is your terms of payment ?A3: 1.T/T: 30% deposit in progress, the harmony 70% paid ahead of shipment2.30% down payment, the balance 70% paid from L/C at sight3.On negotiationQ4: Can you provide Certificates for aluminum materials ? A4:Indeed,we can offer MTC-Substance Check Certification. Q5: Can you provide sample? A5: Of course, we can give you sample, but you require to pay for the sample and freight first of all. We will return the sample fee soon after you make an purchase. Get in touch with Us

Types of Vehicle Gearboxes

In a vehicle, there are many types of gearboxes available. There are planetary gearboxes, Coaxial helical gearboxes, and skew bevel helical gearboxes, among others. In this article, we’ll cover all of them and help you determine which type of gearbox would be right for your vehicle. Also, we’ll discuss how each differs from the others.
gearbox

planetary gearbox

A planetary gearbox is composed of three main components: a sun gear, an input bevel gear, and an output shaft. A planetary gearbox can have different output torques and ratios. The basic model of a planetary gearbox is highly efficient and transmits 97% of the power input. There are several kinds of planetary gearboxes, depending on the type of operation. In general, there are three types: the simple, the intermediate, and the complex.
The price of a planetary gearbox can vary a lot, and it’s important to know what you’ll need. Different manufacturers produce different planetary gearboxes, so check with a manufacturer to see what they have available. Make sure to check the quality of the planetary gearbox before making a final purchase. In addition, be sure to compare the prices and the availability of a particular product. A quality planetary gearbox will provide years of trouble-free operation and will not break your bank.
Planetary gears feature an integer number of teeth. Each planet has teeth that must mesh with its ring or sun. The number of planets, ring, and tooth count of each gear determine whether the teeth mesh. Some planets have fewer teeth than others, so they mesh better than others. However, compound planets can be more flexible and achieve higher reduction ratios. If you’re looking for a planetary gearbox for your next project, consider getting in touch with a manufacturer who specializes in this technology.
When it comes to construction, a planetary gearbox is no exception. It’s extremely important to choose the right planetary gear for your application, because an imbalance in the planet gear can cause increased wear and failure. Moreover, the compact size of a planetary gear ensures maximum heat dissipation. However, a planetary gear box may require cooling in some applications. A planetary gearbox will make your life easier, and it will give you years of trouble-free operation.

Straight bevel helical gearbox

The Straight bevel helical gearbox has a number of advantages, but it has a relatively short manufacturing process. Its most popular application is in the automotive industry, where it is used in many types of vehicles. Other applications include heavy and light equipment and the aviation and marine industries. Below is a brief introduction to this gearbox type. Read on to learn about its benefits. This type of gearbox is one of the easiest to manufacture.
The spiral bevel gear has larger teeth than straight bevel gears, resulting in a smoother, quieter rotation. It can handle high-speed heavy loads with less vibration. Spiral bevel gears are classified by their tooth form and cutting method. Straight bevel gears are easier to design and manufacture, but spiral bevel gears are more expensive. Both designs are suitable for high-speed, heavy-load operations, and general manufacturing applications.
In addition to being easy to install, the modular bevel gears have many advantages. They have an exceptionally high degree of interchangeability and feature the highest standards of component integrity. They can also be tailored to meet your specific requirements. The advantages of this gearbox type include high precision, optimum performance, and low noise. And because they are modular, they can be produced in a variety of finishes. These include stainless steel, titanium, and bronze.
Straight bevel helical gearbox manufacturers are committed to a high degree of precision in their designs. The radii, torques, and tooth profiles of straight bevel gears are more precisely measured than those of cylindrical bevel gears. The same calculations are used for all traditional bevel gear generators. This ensures that your 5-axis milled bevel gear sets have the same calculations and layout.
gearbox

Coaxial helical gearbox

The Coaxial helical gearbox is a highly efficient transmission system that is well suited for light-duty applications. Compared to spur-type gearboxes, the real pitch of a Coaxial helical gearbox is low at all helix angles. This is because the coaxial type has the same number of teeth and center gap as the spur gearbox. Coaxial helical gearboxes also have a smaller footprint and are compact.
Several nations have implemented lockdown regulations for Industrial Gearbox trade, threatening the global economy. Several factors have been implicated in COVID-19, including supply chain, market, and financial markets. Experts are monitoring the situation globally and project remunerative prospects for gearbox manufacturers after the crisis. This report depicts the latest scenario and offers a comprehensive analysis of COVID-19’s impact on the entire industry.
This Coaxial helical gearbox features a compact structure and high precision gear. Its three-stage design combines two-stage gears with a single-stage gear, forging high-quality alloy steel for high precision and durability. The gears are serially-designed for easy interchangeability. They are also available in high-frequency heat-treated steel. A Coaxial helical gearbox is the perfect solution for many applications.
Coaxial helical gearboxes have the added benefit of using cylindrical gears instead of shafts. They operate quietly, and have more surface area to interact with. Their fixed angles make them suitable for heavy-duty applications, like in conveyors, coolers, and grinders. Compared to other gearbox types, Helical gearboxes have higher power-carrying capacity. Listed below are the benefits of a Coaxial Helical Gearbox

Skew bevel helical gearbox

A Skew bevel helical gear box is a common type of industrial gearbox. These gearboxes are rigid and compact and can be used in a variety of applications. They are commonly used in heavy-duty applications such as grinding mills, conveyors, and coolers. They are used in many applications to provide rotary motions between non-parallel shafts. They also have the added benefit of high-efficiency in a variety of industries.
Skew bevel helical gear boxes are suitable for heavy loads and are monolithic in construction. This type of gearbox combines the benefits of bevel and helical gears for right-angle torque, which makes it a popular choice for heavy-duty applications. In addition to being a robust and reliable gearbox, these gearboxes are highly customizable and can meet almost any industrial need.
To maximize the efficiency of bevel gears, FE-based tooth contact analysis is used to develop a sophisticated geometry optimization algorithm. The software also allows users to define optimal flank topography by introducing application-specific weightings for specific load levels. With this data, a manufacturing simulation is conducted to determine the best variant. A robust variant combines the benefits of efficiency, load-carrying capacity, and low excitation behavior.
The helical gear can be angled at 90 degrees. This is similar to a spur gear but produces less noise. It can achieve a nine-to-one speed reduction with one stage. However, a helical gear requires a larger driver gear for higher reductions. This gearbox is suitable for speeds from 1:1 to three times. They are often used in the manufacture of motors and generators.
gearbox

Extruder helical gearbox

An extruder helical gearbox is one of the most common industrial gears. It is compact in size and low-power consuming, making it ideal for heavy-duty applications. Extruder helical gearboxes are suitable for a variety of industrial applications, including cement, plastics, rubber, conveyors, and coolers. In addition to its use in plastics and rubber manufacturing, this gearbox is also useful in other low-power applications such as crushers, coolers, and conveyors.
CZPT SG series Extruder Helical Gearboxes are available in Single Screw and Twin Screw Variations. These gears feature a compact design, high power density, and long service life. Axial bearing housing and thrust bearings are mounted on the input shafts. Extruder helical gearboxes can be installed in various positions, including horizontal, vertical, and inclined.
Helicoidal gears are often produced in a modular manner. This design provides multiple benefits, including engineering and performance advantages, modular production, and the highest level of component integrity. A single helical gearbox can be assembled into a larger gearbox if needed, but modular production ensures consistent performance and economy. This modular design is also cost-effective. It is a versatile and reliable solution for a wide range of applications.
In addition to its efficiencies, Extruder helical gearboxes also have a low noise profile. They have no squeal sounds, and they are silent when running. They can transfer more power than conventional gearboxes. This type of gear has been used in the manufacturing of high-quality plastic products for years. They are often used for applications in automotive transmissions. Aside from being quiet, helical gears have higher contact levels and lower vibration.

China High Precision Low Noise Helical Gear Right Angle Planetary Speed Reducer Gearbox For Servo Motor cvt gearbox
editor by czh 2023-02-16

China China gearbox expert XB series planetary cycloidal pinwheel gear reducer gearbox engine

Leave a reply

Warranty: 1years
Applicable Industries: Accommodations, Garment Outlets, Developing Material Stores, Manufacturing Plant, Equipment Fix Shops, Foodstuff & Beverage Manufacturing facility, Farms, Restaurant, Home Use, Retail, Chnina factory value PTO Generate Shaft cardan drive shaft Universal shaft for agricultural equipment Food Store, Printing Stores, Development works , Energy & Mining, Foods & Beverage Retailers, Other, Marketing Firm
Custom-made assistance: OEM, ODM, OBM
Gearing Arrangement: Helical
Output Torque: up to 2 Front Wheel Bearing for hefty equipment 482472 CZPT or other brand names requested, NSK….. Used industry equipment

Warehouse
Crew
Suggest Goods Aggressive cost R sequence helical reduction gearbox for shredder
XWD series cycloidal velocity reducer mixer gearbox
Sequence K helical-bevel equipment models equipment box with hollow shaft 2018 China
Our Advantages Business Profile Certifications Item packaging Packing Information : Packing, 1set/carton
Shipping Details : 2-30 days
one. Particular logistics packaging two. Appropriate carton dimensions 3. Shock bubble movie four. Specialist placement 5. Professional shock six. Complete deal FAQ 1. How to decide on a gearbox which fulfills our prerequisite?You can refer to our catalogue to select the gearbox or we can assist to select when you supplythe technical data of necessary output torque, output speed and motor parameter and so forth.2. What information shall we give prior to positioning a buy order?a) Variety of the gearbox, ratio, enter and output variety, input flange, 0571 3310AB Prop shaft Assistance Heart Bearing For Jeep mounting placement, and motor informationetc.b) Housing coloration.c) Buy quantity.d) Other particular specifications.3. What industries are your gearboxes currently being used?Our gearboxes are extensively employed in the areas of textile, foods processing, beverage, chemical business,escalator,computerized storage gear, metallurgy, tabacco, environmental security, CZPT X-501 official factory supplier Integrated Propulsion System brushless dc motor for massive drone logistics and and so forth.4. Doyou offer motors?We have stable motor suppliers who have been coperating with us for a lengthy-time. They can provide motorswith higher high quality.

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!
gearbox

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China China gearbox expert XB series planetary cycloidal pinwheel gear reducer gearbox engine
editor by czh 2023-02-16

China ABA Factory High Precision Easy Installation Match Servo Motors Gear Reductor Gearbox Planetary Reducer with Best Sales

Leave a reply

Error:获取返回内容失败，
Your session has expired. Please reauthenticate.

Key Market Insights Related to Worm Reduction Gearboxes

A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.
gearbox

Backlash measurement

Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.

Worm reduction gearboxes

Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.
gearbox

Worm reduction gearboxes with closed bladders

The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.

Shaft arrangement of a gearbox

The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.
gearbox

Mounting of a gearbox

In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.

China ABA Factory High Precision Easy Installation Match Servo Motors Gear Reductor Gearbox Planetary Reducer with Best Sales
editor by czh 2023-02-16

China BWD Cycloidal Gear Motor Speed Reducer Gearbox with 380V AC motor Gear Box Reducer planetary gearbox

Leave a reply

Applicable Industries: Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Farms, Restaurant, Home Use, Food Shop, Printing Shops, Construction works , Food & Beverage Shops, Advertising Company
Weight (KG): 55 KG
Customized support: OEM
Gearing Arrangement: Planetary
Output Torque: 50~2300Nm
Input Speed: 1400Rpm
Output Speed: 14-280rpm
Material: Cast Iron
Color: Customer Requirement
Certificate: ISO9001
Ratio: 11
Application: Mining Plant
Input form: IEC flange, direct with motor, shaft input
Product name: Cycloid Speed Reducer
Packaging Details: wooden box

Product Details Cycloid ReducerThe cycloidal pinwheel reducer is a novel transmission device that applies the principle of planetary transmission and adopts the meshing of cycloid pin teeth. The entire transmission device of the cycloid reducer can be divided into 3 parts: the input part, the deceleration part, and the output part.The cycloidal pinwheel reducer adopts the principle of cycloid pin-tooth meshing and planetary transmission, so it is usually called a planetary cycloid reducer. The planetary cycloidal pinwheel reducer can be widely used in petroleum, environmental protection, chemical industry, cement, transportation, Textile, pharmaceutical, food, printing, hoisting, mining, metallurgy, construction, power generation and other industries, as a driving or deceleration device, the machine is divided into horizontal, vertical, biaxial and direct-connected assembly methods

Model:	BWD, BXD
Installation:	direct connection installation, flange installation
Motor:	factory equipped motor, Siemens, ABB, etc.
Ratio	Stage Ratio：9, 11, 17, 23, 29, 35, 43, 59, 71, 87Stage Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849

Specification Features1. It can achieve a high reduction ratio of 1:87 and a high-efficiency single-stage transmission of more than 90%. If multi-stage transmission is used, the reduction ratio is larger.2. The reduction ratio of the first-stage transmission is 9~87, the reduction ratio of the double-stage transmission is 121~5133, the multi-stage combination can reach tens of thousands, and the pin-tooth meshing system has rolling friction, and the meshing surface has no relative sliding, so the first-stage deceleration The efficiency is 94%.3. Compact structure and small volume Due to the planetary transmission principle, the input shaft and the output shaft are on the same axis line, so that the model can obtain the smallest size possible. Conditions of Use1. The cycloidal pinwheel reducer is allowed to be used in the occasion of continuous working system, and it is allowed to run in both forward and reverse directions at the same time. Some models of cycloid reducer only allow one-way rotation.2. The rated speed of the input shaft is 1500 rpm. When the input power is greater than 18.5 kW, it is recommended to use a 960 rpm 6-pole motor.3. The working position of the horizontally installed cycloid reducer is the horizontal position. The maximum horizontal inclination angle during installation is generally less than 15°. When it exceeds 15°, other measures should be taken to ensure sufficient lubrication and prevent oil leakage.4. The output shaft of the cycloid reducer cannot be subjected to large axial force and radial force, and other measures must be taken when there is a large axial force and radial force. Company Profile Certifications Packing and Shipping

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China BWD Cycloidal Gear Motor Speed Reducer Gearbox with 380V AC motor Gear Box Reducer planetary gearbox
editor by czh2023-02-07

China Cycloidal Gearbox Cyclo Speed Reducer Gearboxes Gear Best Price Manufacture Box Drive Motor Planetary Sumitomo Power Industrial Transmissio Cycloidal Gearbox supplier

Leave a reply

Item Description

Cycloidal gearbox cyclo equipment box travel motor velocity reducer gearboxes planetary sumitomo power industrial transmission very best value manufacture Cycloidal gearbox

X / B sequence high good quality cycloidal gearbox tiny planetary reducer

Swift Particulars:

Sort: XB series Cycloidal Pin Wheel Speed Reducer

Enter Pace: 1000-1500rmp

Output Velocity: .3-280rpm

Certification: ISO9001 CE

Ex Electrical power:.09-132KW

Warranty: 1Years

Merchandise Name	X/B series Cycloidal Pin Wheel Speed Reducer
The Equipment Materials	GCR15
The case Material	Cast Iron
Color	Blue,Environmentally friendly, or Customized
HS Code	84834090
Product	X3
Supply time	seven-10days
Brand	TIANGOU

Application:	Motor, Machinery, Agricultural Machinery
Function:	Distribution Power, Speed Reduction, Speed Increase
Output Torque:	2.6-20000n.M
Output Speed:	11-280rpm
Input Speed:	750-3000rpm
Ratio:	6-51133

###

Samples:	US$ 9999/Piece 1 Piece(Min.Order) \| Request Sample

###

Product Name	X/B series Cycloidal Pin Wheel Speed Reducer
The Gear Material	GCR15
The case Material	Cast Iron
Color	Blue,Green, or Customized
HS Code	84834090
Model	X3
Delivery time	7-10days
Brand	TIANGOU

Application:	Motor, Machinery, Agricultural Machinery
Function:	Distribution Power, Speed Reduction, Speed Increase
Output Torque:	2.6-20000n.M
Output Speed:	11-280rpm
Input Speed:	750-3000rpm
Ratio:	6-51133

###

Samples:	US$ 9999/Piece 1 Piece(Min.Order) \| Request Sample

###

Product Name	X/B series Cycloidal Pin Wheel Speed Reducer
The Gear Material	GCR15
The case Material	Cast Iron
Color	Blue,Green, or Customized
HS Code	84834090
Model	X3
Delivery time	7-10days
Brand	TIANGOU

Developing a Mathematical Model of a Cyclone Gearbox

Low friction

Compact

High reduction ratio

Kinematics

Planetary gearboxes vs cycloidal gearboxes

Generally, there are two types of gearboxes that are used for motion control applications: cycloidal gearbox and planetary gearbox. Cycloid gearboxes are used for high-frequency motions, while planetary gearboxes are suitable for low-speed applications. Both are highly accurate and precise gearboxes that are capable of handling heavy loads at high cycle rates. But they have different advantages and disadvantages. So, engineers need to determine which type of gearbox is best suited for their application.
Cycloid gearboxes are commonly used in industrial automation. They provide excellent performance with ratios as low as 10:1. They offer a more compact design, higher torque density and greater overload protection. They also require less space and are less expensive than planetary gearboxes.
On the other hand, planetary gearboxes are lightweight and offer a higher torque density. They are also capable of handling higher ratios. They have a longer life span and are more precise and durable. They can be found in a variety of styles, including square-framed, round-framed and double-frame designs. They offer a wide range of torque and speed capabilities and are used for numerous applications.
Cycloid gearboxes can be manufactured with different types of cycloidal cams, including single or compound cycloidal cams. Cycloid cams are cylindrical elements that have cam followers that rotate in an eccentric fashion. The cam followers act like teeth on the internal gear. Cycloid cams are a simple concept, but they have numerous advantages. They have a low backlash over extended periods of time, allowing for more accurate positioning. They also have internal compressive stresses and an overlap factor between the rolling elements.
Planetary gearboxes are characterized by three basic force-transmitting elements: ring gear, sun gear, and planet gear. They are generally two-stage gearboxes. The sun gear is attached to the input shaft, which in turn is attached to the servomotor. The ring gear turns the sun gear and the planet gear turns the output shaft.
China Cycloidal Gearbox Cyclo Speed Reducer Gearboxes Gear Best Price Manufacture Box Drive Motor Planetary Sumitomo Power Industrial Transmissio Cycloidal Gearbox supplier
editor by czh 2023-01-25

China Transmission Geared Motor Unit Src Screw Drive Lifts Stepper Cyclo Cycloidal Extruder Helical Planetary Bevel Worm Speed Variator Gear Reducer Gearbox cycloidal gearbox lubrication

Leave a reply

Item Description

SRC HELICAL GEARBOX

Items Description

We produce velocity reducers in rigorous accordance with ISO9001 common to offer our buyers with high quality gearboxes at competitive charges. Our gearboxes are geared up with equipment from intercontinental popular makes, these kinds of as lubricant from Shell brand name, and bearing from CZPT manufacturer. The housing and equipment are produced in our firm below stringent quality control. All our merchandise are offered in big stocks, and we can also offer you with tailored reducer solutions, pleasefeel self-assured to speak to us.

TRC: code for gear models series

1. No code signifies foot-mounted

2.F: B5 flange mounted

3.Z:B14 flange mounted

Specification code of gear units 01,02.03.04

B01,MO1……means foot code,with no flange

one.I.II1.B5 Output flange specification, defaultl not to compose out is ok

2. IECinput flange

3.HS: Shaft enter

Transmission ratio of equipment units

one.M1: Mounting positio, default mounting position M1 not to compose out is ok

1.No mark indicates without having motor

two. Product motos (poles of energy)voltage – frequency

voltage – frequency

HangZhou Sihai Machinery Co., Ltd.

History: Much more than 20 a long time of knowledge in the manufacture of reducer merchandise.Scale: Go over doing work location of 13300 square. meters,have much more than 113 employees.
Technological innovation: A team of expert . technical engineers and a powerful R&D crew.
Management: Scientific ERP administration and stringent top quality management program.
Tools: fifty CNC lathes,6 machining. centers, 6 gear grinding machines, 2 large-speed.hard hobbing devices, 12 gear hobbing
machines. 10 CNC cylindrical grinding machines,4 CNC inside grinding machines 1spectrometer, higher-pace equipment shaping 1 device,
2 gear measuring centers 1 coordinate measuring instrument.
lnnovation: Continuously diversify items range to fulfill customers’needs.Generation capacity: a thousand pcs/day.
Prolonged-phrase supplier of world-course organizations: t he primary markets are in Southea st Asia, Europe, Middle East.
Marketing model: All export enterprise.

To Be Negotiated 1 Piece
(Min. Order)

###

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness:	Hardened Tooth Surface
Step:	Double-Step
Type:	Gear Reducer
Transport Package:	1PCS/1box
Specification:	aluminium

###

Customization:	Available \| Customized Request

###

TRC: code for gear units series

1. No code means foot-mounted

2.F: B5 flange mounted

3.Z:B14 flange mounted

Specification code of gear units 01,02.03.04

B01,MO1……means foot code,without flange

1.I.II1.B5 Output flange specification, defaultl not to write out is ok

2. IECinput flange

3.HS: Shaft input

Transmission ratio of gear units

1.M1: Mounting positio, default mounting position M1 not to write out is ok

1.No mark means without motor

2. Model motos (poles of power)voltage – frequency

voltage – frequency

To Be Negotiated 1 Piece
(Min. Order)

###

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness:	Hardened Tooth Surface
Step:	Double-Step
Type:	Gear Reducer
Transport Package:	1PCS/1box
Specification:	aluminium

###

Customization:	Available \| Customized Request

###

TRC: code for gear units series

1. No code means foot-mounted

2.F: B5 flange mounted

3.Z:B14 flange mounted

Specification code of gear units 01,02.03.04

B01,MO1……means foot code,without flange

1.I.II1.B5 Output flange specification, defaultl not to write out is ok

2. IECinput flange

3.HS: Shaft input

Transmission ratio of gear units

1.M1: Mounting positio, default mounting position M1 not to write out is ok

1.No mark means without motor

2. Model motos (poles of power)voltage – frequency

voltage – frequency

The Basics of a Cyclone Gearbox

Besides being compact, cycloidal speed reducers also offer low backlash and high ratios. Because of the small size of the drive, they are ideal for applications where space is a problem. helical gearbox

Involute gear tooth profile

Almost all gears use an involute gear tooth profile. This profile has a single curve, which means that the gear teeth do not have to be aligned closely with each other. This profile is smooth and can be manufactured easily.
Cycloid gears have a combination of epicycloid and hypocycloid curves. This makes them stronger than involute gear teeth. However, they can be more expensive to manufacture. They also have larger reduction ratios. They transmit more power than involute gears. Cycloid gears can be found in clocks.
When designing a gear, you need to consider several factors. Some of these include the number of teeth, the tooth angle and the lubrication type. Having a gear tooth that is not perfectly aligned can result in transmission error, noise and vibration.
The tooth profile of an involute gear is usually considered the best. Because of this, it is used in a wide variety of gears. Some of the most common applications for this profile are power transmission gears. However, this profile is not the best for every application.
Cycloid gears require more complex manufacturing processes than involute gear teeth. This can cause a larger tooth cost. Cycloid gears are used for less noisy applications.
Cycloid gears also transmit more power than involute gears. This can cause problems if the radii change tangentially. However, the shape is more simple than involute gears. Involute gears can handle centre sifts better.
Cycloid gears are less susceptible to transmission error. Cycloid gears have a convex surface, which makes them stronger than involute teeth. Cycloid gears also have a larger reduction ratio than involute gears. Cycloid teeth do not interfere with the mating teeth. However, they have a smaller number of teeth than involute teeth.

Rotation on the inside of the reference pitch circle of the pins

Whether a cycloidal gearbox is designed for stationary or rotating applications, the fundamental law of gearing must be observed: The ratio of angular velocities must be constant. This requires the rotation on the inside of the reference pitch circle of the pins to be constant. This is achieved through a series of cycloidal teeth, which act like tiny levers to transmit motion.
A cycloidal disc has N lobes which are rotated by three lobes per rotation around N pins. The number of lobes on a cycloidal disc is a significant factor in determining the transmission ratio.
A cycloidal disc is driven by an eccentric input shaft which is mounted to an eccentric bearing within an output shaft. As the input shaft rotates, the cycloidal disc moves around the pins of the pin disc.
The drive pin rotates at a 40 deg angle while the cycloidal disc rotates on the inside of the reference pitch circle of pins. As the drive pin rotates, it will slow the output motion. This means that the output shaft will complete only three revolutions with the input shaft, as opposed to nine revolutions with the input shaft.
The number of teeth on a cycloidal disc must be small compared to the number of surrounding pins. The disc must also be constructed with an eccentric radius. This will determine the size of the hole which will be required for the pin to fit between the pins.
When the input shaft is turned, the cycloidal disc will rotate on the inside of the reference pitch circle of roller pins. This will then transmit motion to the output shaft. The output shaft is supported by two bearings in an output housing. This design has low wear and torsional stiffness. helical gearbox

Transmission ratio

Choosing the right transmission ratio of cycloidal gearbox isn’t always easy. You might need to know the size of your gearbox before you can make an educated choice. You may also need to refer to the product catalog for guidance. For example, CZPT gearboxes have some unique ratios.
A cycloidal gear reducer is a compact and high-speed torque transmission device that reverses the direction of angular movement of the follower shaft. It consists of an eccentric cam positioned inside a cycloidal disc. Pin rollers on the follower shaft fit into matching holes in the cycloidal disc. In the process, the pins slide around the holes, in response to wobbling motion. The cycloidal disc is also capable of engaging the internal teeth of a ring-gear housing.
A cycloidal gear reducer can be used in a wide variety of applications, including industrial automation, robotics and power transmissions on boats and cranes. A cycloidal gear reducer is ideally suited for heavy duty applications with large payloads. They require specialized manufacturing processes, and are often used in equipment with precise output and high efficiency.
The cycloidal gear reducer is a relatively simple structure, but it does require some special tools. Cycloid gear reducers are also used to transmit torque, which is one of the reasons they are so popular in automation. Using a cycloidal gear reducer is a good choice for applications that require higher efficiency and lower backlash. It is also a good choice for applications where size is a concern. Cycloid gears are also a good choice for applications where high speed and high torque are required.
The transmission ratio of cycloidal gearbox is probably the most important function of a gearbox. You need to know the size of your gearbox and the type of gears it contains in order to make the right choice.

Vibration reduction

Considering the unique dynamics of a cycloidal gearbox, vibration reduction measures are required for a smooth operation. These measures can also help with the detection of faults.
A cycloidal gearbox is a gearbox with an eccentric bearing that rotates the center of the gears. It shares torque load with five outer rollers at any given time. It can be applied in many applications. It is a relatively inexpensive asset. However, if it fails, it can have significant economic impacts.
A typical input/output gearbox consists of a ring plate and two cranks mounted on the input shaft. The ring plate rotates when the input shaft rotates. There are two bearings on the output shaft.
The ring plate is a major noise source because it is not balanced. The cycloidal gear also produces noise when it meshes with the ring plate. This noise is generated by structural resonance. Several studies have been performed to solve this problem.
However, there is not much documented work on the condition monitoring of cycloidal gearboxes. In this article, we will introduce modern techniques for vibration diagnostics.
A cycloidal gearbox with a reduced reduction ratio has higher induced stresses in the cycloidal disc. In this case, the size of the output hole is larger and more material is removed from the cycloidal disc. This increase in the disc’s stresses leads to higher vibration amplitudes.
The load distribution along the width of the gear is an important design criterion. Using different gear profiles can help to optimize the transmission of torque. The contact stress of the cycloidal disc can also be investigated.
To determine the amplitude of the noise, the frequency of the gear mesh is multiplied by the shaft rate. If the RPM is relatively stable, the frequency can be used as a measure of magnitude. However, this is only accurate at close to failure. helical gearbox

Comparison with planetary gearboxes

Several differences exist between cycloidal gearboxes and planetary gearboxes. They are related to gear geometry and manufacturing processes. Among them, there are:
– The output shaft of a cycloidal gearbox has a larger torque than the input shaft. The rotational speed of the output shaft is lower than the input shaft.
– The cycloid gear disc rotates at variable velocity, while the planetary gear has a fixed speed. Consequently, the cycloid disc and output flange transmission accuracy is lower than that of the planetary gears.
– The cycloidal gearbox has a larger gripping area than the planetary gear. This is an advantage of the cycloidal gearbox in that it can handle larger loads.
– The cycloid profile has a significant impact on the quality of contact meshing between the tooth surfaces. The width of the contact ellipses increases by 90%. This is a result of the elimination of undercuts of the lobes. In this way, the contact force on the cycloid disc is decreased significantly.
– The cycloid drive has lower backlash and high torsional stiffness. This allows a cycloidal drive to be more stable against shock loads. The cycloid drive is also a compact design, which is ideally suited for applications with large transmission ratios.
– The output hub of the cycloid gearbox has movable pins and rollers. These components are attached to the ring gear in the outer gearbox. The output shaft is also turned by the planet carrier. The output hub of the cycloid system is composed of two parts: the ring gear and the output flange.
– The input shaft of a cycloidal gearbox is connected to a servomotor. The input shaft is a cylindrical element that is fixed to the planet carrier.
China Transmission Geared Motor Unit Src Screw Drive Lifts Stepper Cyclo Cycloidal Extruder Helical Planetary Bevel Worm Speed Variator Gear Reducer Gearbox cycloidal gearbox lubrication
editor by czh 2023-01-12

China Gpg Gpb Transmission Reducer Gearbox High Precision Planetary Gearhead with Cheap Price cycloidal gear reducer design

Leave a reply

Merchandise Description

TaiBang Motor Market Team Co., Ltd.

The principal goods is induction motor, reversible motor, DC brush gear motor, DC brushless gear motor, CH/CV massive equipment motors, Planetary gear motor ,Worm gear motor etc, which utilised commonly in different fields of producing pipelining, transportation, food, drugs, printing, material, packing, business office, apparatus, enjoyment etc, and is the preferred and matched merchandise for automated machine.

Model Instruction

GB090-10-P2

090

571

Reducer Collection Code

Exterior Diameter

Reduction Ratio

Reducer Backlash

GB:Higher Precision Square Flange Output

GBR:Higher Precision Correct Angle Sq. Flange Output

GE:High Precision Round Flange Output

GER:High Precision Proper Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
one hundred fifty five:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
a hundred and fifteen:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm

571 means 1:10

P0:High Precision Backlash

P1:Precision Backlash

P2:Common Backlash

Major Technological Efficiency

Item	Amount of phase	Reduction Ratio	GB042	GB060	GB060A	GB090	GB090A	GB115	GB142	GB180	GB220
Rotary Inertia	1	three	.03	.sixteen		.sixty one		3.twenty five	nine.21	28.98	sixty nine.61
		four	.03	.14		.forty eight		two.seventy four	7.fifty four	23.67	fifty four.37
		five	.03	.thirteen		.forty seven		two.71	7.forty two	23.29	53.27
		6	.03	.13		.forty five		two.65	7.twenty five	22.75	51.seventy two
		seven	.03	.13		.forty five		two.62	7.14	22.forty eight	fifty.ninety seven
		eight	.03	.13		.forty four		two.fifty eight	7.07	22.fifty nine	50.eighty four
		nine	.03	.thirteen		.44		2.57	seven.04	22.fifty three	fifty.63
		10	.03	.thirteen		.forty four		2.57	seven.03	22.fifty one	fifty.56
	2	15	.03	.03	.thirteen	.thirteen	.forty seven	.forty seven	two.71	7.forty two	23.29
	twenty	.03	.03	.13	.13	.forty seven	.forty seven	two.seventy one	seven.42	23.29
	twenty five	.03	.03	.13	.13	.47	.forty seven	two.seventy one	seven.forty two	23.29
	thirty	.03	.03	.13	.13	.47	.forty seven	2.seventy one	seven.forty two	23.29
	35	.03	.03	.13	.13	.47	.forty seven	2.seventy one	7.42	23.29
	40	.03	.03	.13	.13	.forty seven	.47	2.seventy one	7.forty two	23.29
	forty five	.03	.03	.13	.thirteen	.47	.47	two.71	seven.forty two	23.29
	fifty	.03	.03	.thirteen	.thirteen	.forty four	.44	two.57	7.03	22.51
	sixty	.03	.03	.13	.thirteen	.44	.44	2.57	seven.03	22.51
	70	.03	.03	.13	.13	.44	.forty four	2.fifty seven	7.03	22.51
	80	.03	.03	.thirteen	.13	.44	.44	two.57	7.03	22.fifty one
	ninety	.03	.03	.13	.thirteen	.forty four	.44	two.fifty seven	7.03	22.51
	a hundred	.03	.03	.13	.13	.44	.44	two.57	seven.03	22.51

Item		Amount of phase	GB042	GB060	GB060A	GB90	GB090A	GB115	GB142	GB180	GB220
Backlash(arcmin)	High Precision P0	1				≤1	≤1	≤1	≤1	≤1	≤1
	High Precision P0	two						≤3	≤3	≤3	≤3
	Precision P1	one	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3
	Precision P1	two	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	one	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	2	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7
Torsional Rigidity(N.M/arcmin)		1	three	seven	seven	fourteen	14	twenty five	50	145	225
Torsional Rigidity(N.M/arcmin)		2	3	seven	seven	14	14	twenty five	fifty	a hundred forty five	225
Noise(dB)		one,two	≤56	≤58	≤58	≤60	≤60	≤63	≤65	≤67	≤70
Rated input speed(rpm)		1,2	5000	5000	5000	4000	4000	4000	3000	3000	2000
Max enter velocity(rpm)		one,2	ten thousand	10000	ten thousand	8000	8000	8000	6000	6000	4000

Noise test normal:Distance 1m,no load.Calculated with an input velocity 3000rpm

US $50
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Machinery, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Double-Step

###

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

090

010

Reducer Series Code

External Diameter

Reduction Ratio

Reducer Backlash

GB:High Precision Square Flange Output

GBR:High Precision Right Angle Square Flange Output

GE:High Precision Round Flange Output

GER:High Precision Right Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
155:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
115:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm

010 means 1:10

P0:High Precision Backlash

P1:Precision Backlash

P2:Standard Backlash

###

Item	Number of stage	Reduction Ratio	GB042	GB060	GB060A	GB090	GB090A	GB115	GB142	GB180	GB220
Rotary Inertia	1	3	0.03	0.16		0.61		3.25	9.21	28.98	69.61
		4	0.03	0.14		0.48		2.74	7.54	23.67	54.37
		5	0.03	0.13		0.47		2.71	7.42	23.29	53.27
		6	0.03	0.13		0.45		2.65	7.25	22.75	51.72
		7	0.03	0.13		0.45		2.62	7.14	22.48	50.97
		8	0.03	0.13		0.44		2.58	7.07	22.59	50.84
		9	0.03	0.13		0.44		2.57	7.04	22.53	50.63
		10	0.03	0.13		0.44		2.57	7.03	22.51	50.56
	2	15	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		20	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		25	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		30	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		35	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		40	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		45	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		50	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		60	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		70	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		80	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		90	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		100	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51

###

Item		Number of stage	GB042	GB060	GB060A	GB90	GB090A	GB115	GB142	GB180	GB220
Backlash(arcmin)	High Precision P0	1				≤1	≤1	≤1	≤1	≤1	≤1
	High Precision P0	2						≤3	≤3	≤3	≤3
	Precision P1	1	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3
	Precision P1	2	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	1	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	2	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7
Torsional Rigidity(N.M/arcmin)		1	3	7	7	14	14	25	50	145	225
Torsional Rigidity(N.M/arcmin)		2	3	7	7	14	14	25	50	145	225
Noise(dB)		1,2	≤56	≤58	≤58	≤60	≤60	≤63	≤65	≤67	≤70
Rated input speed(rpm)		1,2	5000	5000	5000	4000	4000	4000	3000	3000	2000
Max input speed(rpm)		1,2	10000	10000	10000	8000	8000	8000	6000	6000	4000

US $50
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Machinery, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Double-Step

###

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

090

010

Reducer Series Code

External Diameter

Reduction Ratio

Reducer Backlash

GB:High Precision Square Flange Output

GBR:High Precision Right Angle Square Flange Output

GE:High Precision Round Flange Output

GER:High Precision Right Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
155:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
115:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm

010 means 1:10

P0:High Precision Backlash

P1:Precision Backlash

P2:Standard Backlash

###

Item	Number of stage	Reduction Ratio	GB042	GB060	GB060A	GB090	GB090A	GB115	GB142	GB180	GB220
Rotary Inertia	1	3	0.03	0.16		0.61		3.25	9.21	28.98	69.61
		4	0.03	0.14		0.48		2.74	7.54	23.67	54.37
		5	0.03	0.13		0.47		2.71	7.42	23.29	53.27
		6	0.03	0.13		0.45		2.65	7.25	22.75	51.72
		7	0.03	0.13		0.45		2.62	7.14	22.48	50.97
		8	0.03	0.13		0.44		2.58	7.07	22.59	50.84
		9	0.03	0.13		0.44		2.57	7.04	22.53	50.63
		10	0.03	0.13		0.44		2.57	7.03	22.51	50.56
	2	15	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		20	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		25	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		30	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		35	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		40	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		45	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		50	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		60	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		70	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		80	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		90	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		100	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51

###

Item		Number of stage	GB042	GB060	GB060A	GB90	GB090A	GB115	GB142	GB180	GB220
Backlash(arcmin)	High Precision P0	1				≤1	≤1	≤1	≤1	≤1	≤1
	High Precision P0	2						≤3	≤3	≤3	≤3
	Precision P1	1	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3
	Precision P1	2	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	1	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	2	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7
Torsional Rigidity(N.M/arcmin)		1	3	7	7	14	14	25	50	145	225
Torsional Rigidity(N.M/arcmin)		2	3	7	7	14	14	25	50	145	225
Noise(dB)		1,2	≤56	≤58	≤58	≤60	≤60	≤63	≤65	≤67	≤70
Rated input speed(rpm)		1,2	5000	5000	5000	4000	4000	4000	3000	3000	2000
Max input speed(rpm)		1,2	10000	10000	10000	8000	8000	8000	6000	6000	4000

The Basics of Designing a Cyclone Gearbox

Compared to conventional gearboxes, the cycloidal gearbox offers a number of advantages including a higher ratio of transmission, robustness against shock loads, and greater positioning accuracy. However, designing a cycloidal gearbox can be complicated. This article will discuss some of the basic design principles. In addition, it will cover topics such as size, position accuracy, and transmission ratios. helical gearbox

Basic design principles

Unlike a conventional ring gear, a cycloidal gearbox uses a cycloidal disc to provide torque multiplication. The output direction of the cycloidal gear disc is opposite to the rotation of the input shaft. This allows for more compact gear construction. It also allows for increased load capacity.
Cycloid drive kinematics can appear complex, but they are actually quite simple. Instead of rotating around the center of gravity like conventional gears, the cycloidal disc rotates around fixed pins. This provides a higher reduction ratio.
To reduce vibrations and noise, multiple cycloidal discs are used. This allows for uniform distribution of forces on the carrier pin devices. This also provides a better rotational balance. In addition, multiple cycloidal discs reduce the axial moment of the carrier pin devices.
The cycloidal gear disc is supported by a separate gear disc bearing. This design provides a low component count and reduces wear. This type of kinematics can also be used in an electric motor with a high power density.
The cycloidal gear disc provides a high reduction ratio, which allows for compact construction. Unlike a ring gear, the cycloidal disc has fewer teeth. It also provides a higher reduction ratio, which is advantageous for high rotational input speed applications.
Cycloid gear discs have cylindrical holes, which allow for carrier pin devices to protrude through them. This is useful because the carrier pin devices can roll along the inside wall of the cylindrical hole in the gear disc.
A load plate is also used to provide anchorage for external structures. This plate contains threaded screw holes arranged 15mm away from the center. It has a 9mm external diameter and a 3mm through hole.

Transmission ratios up to 300:1

cycloidal gearboxes are used in a wide range of applications, from machine tools to medical imaging devices. Compared to planetary gearboxes, they offer superior positioning accuracy, torsional stiffness, backlash, and fatigue performance.
Cycloid gearboxes are also capable of transmitting more torque than planetary gears. In addition, they have a lower Hertzian contact stress and higher overload protection. Cycloid gearboxes are able to provide transmission ratios up to 300:1 in a small package.
Cycloid gears also have lower backlash over extended periods, making them an ideal choice for applications with critical positioning accuracy. Cycloid gearboxes also have good wear resistance, as well as low friction. Cycloid gears are lightweight and have good torsional stiffness, making them ideal for applications with heavy loads.
Cycloid gearboxes have several different designs. They can provide transmission ratios up to 300:1 without the need for additional pre-stages. Cycloid gears also require more accurate manufacturing processes than involute gears. Cycloid gearboxes can also be used for applications that require high power consumption, and can withstand shock loads.
Cycloid gearboxes can be adapted to fit most common servomotors. They have a modular design, all-round corrosion protection, and easy installation. Cycloid gears have a radial clamping ring, which reduces inertia by up to 39%.
CZPT Precision Europe GmbH, a subsidiary of CZPT Group, has developed an innovative online configurator to simplify the configuration of gearboxes. CZPT cycloidal gearheads are precision-built, robust, and reliable. They have a two-stage reduction principle, which minimises vibration and provides even force distribution.
Cycloid gears are capable of providing transmission ratios from 30:1 to 300:1. Cycloid gearboxes can achieve high gear ratios because they require fewer moving parts, and they have a low backlash. helical gearbox

Robustness against shock loads

Unlike conventional gearboxes that are easily damaged by shock loads, the cycloidal gearbox is extremely robust. It is a versatile solution that is ideally suited for handling equipment, food manufacturing, and machine tools.
The mechanical construction of a cycloidal gearbox consists of several mechanical components. These include cycloidal wheels, bearings, transformation elements, and needles. In addition, it has high torsional stiffness and tilting moment. It is also accompanied by highly nonlinear friction characteristic.
In order to assess the robustness of the cycloidal gearbox against shock loads, a mathematical model was developed. The model was used to calculate the stress distribution on the cycloid disc. This model can be used as a basis for more complex mechanical models.
The model is based on new approach, which allows to model stiction in all quadrants of the cycloid gear. In addition, it can be applied to actuator control.
The mathematical model is presented together with the procedure for measuring the contact stress. The results are compared to the measurement performed in the real system. The model and the measurement are found to be very close to each other.
The model also allows for the analysis of different gear profiles for load distribution. In addition, it is possible to analyze contact stresses with different geometric parameters. The mesh refinement along the disc width helps to ensure an even distribution of contact forces.
The stiction breakaway speed is calculated to the motor side. The non-zero current is then derived to the input side of the gearbox. In addition, a small steady phase is modeled during the speed direction transition. The results of the simulation are compared to the measurement. The results show that the model is extremely accurate.

Positioning accuracy

Getting the correct positioning accuracy from a cycloidal gearbox is no small feat. This is because the gears are compact, and the clearances are relatively small. This means you can expect a lot of torque from your output shaft. However, this is only part of the picture. Other concerns, such as backlash, kinematic error, and loading are all important considerations.
Getting the best possible positioning accuracy from a cycloidal gearbox means choosing a reducer that is well-made and correctly configured. A properly-selected reducer will eliminate repeatable inaccuracies and provide absolute positioning accuracy at all times. In addition, this type of gearbox offers several advantages over conventional gearboxes. These include high efficiency, low backlash, and high overload protection.
Getting the correct positioning accuracy from a gearbox also involves choosing a supplier that knows what it is doing. The best vendors are those who have experience with the product, offer a wide variety, and provide support and service to ensure the product is installed and maintained correctly. Another consideration is the manufacturer’s warranty. A reputable manufacturer will offer warranties for the gearbox. The aforementioned factors will ensure that your investment in a cycloidal gearbox pays off for years to come.
Getting the correct positioning accuracy from your cycloidal gearbox involves choosing a manufacturer that specializes in this type of product. This is particularly true if you are involved in robotics, automated painting, or any other industrial process that requires the best possible accuracy. A good manufacturer will offer the latest technology, and have the expertise to help you find the best solution for your application. This will ensure your product is a success from start to finish. helical gearbox

Size

Choosing the right size of cycloidal gearbox is important for its efficient operation. However, it is not a simple task. The process involves complex machining and requires the creation of many parts. There are different sizes of cycloidal gearboxes, and a few basic rules of thumb can help you choose the right size.
The first rule of thumb for choosing the right size of cycloidal gearboxes is to use a gearbox with the same diameter of the input shaft. This means that the gearbox must be at least 5mm thick. The cycloid will also require a base and a bearing to hold the driveshaft in place. The base should be large enough to house the pins. The bearing must be the same size as the input shaft.
The next rule of thumb is to have a hole in the cycloid for the output shaft. In this way, the output will be back-drivable and has low backlash. There should be at least four to six output holes. The size of the holes should be such that the centerline of the cycloid is equal to the size of the center of the bearing.
Using a Desmos graph, you can then create the gear parameters. The number of pins should be equal to the number of teeth in the cycloidal gear, and the size of the pins should be twice the size of the gear. The radius of the pins should be equal to the value of C from Desmos, and the size of the pin circle should be equal to the R value.
The final rule of thumb is to ensure that the cycloid has no sharp edges or discontinuities. It should also have a smooth line.
China Gpg Gpb Transmission Reducer Gearbox High Precision Planetary Gearhead with Cheap Price cycloidal gear reducer design
editor by czh 2023-01-03

China Automatic Power Transmission Reducer Precision Planetary Gearbox for Gear Motors cycloidal drive generator

Leave a reply

Merchandise Description

TaiBang Motor Sector Group Co., Ltd.

The major items is induction motor, reversible motor, DC brush equipment motor, DC brushless equipment motor, CH/CV big equipment motors, Planetary equipment motor ,Worm equipment motor etc, which used broadly in a variety of fields of producing pipelining, transportation, foods, drugs, printing, fabric, packing, workplace, equipment, entertainment and many others, and is the preferred and matched solution for automatic machine.

Design Instruction

GB090-ten-P2

090

571

Reducer Collection Code

Exterior Diameter

Reduction Ratio

Reducer Backlash

GB:High Precision Square Flange Output

GBR:Large Precision Right Angle Square Flange Output

GE:Large Precision Spherical Flange Output

GER:Higher Precision Correct Spherical Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
a hundred and fifty five:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
a hundred and fifteen:115x115mm
142:142x142mm
one hundred eighty:180x180mm
220:220x220mm

571 means 1:10

P0:Substantial Precision Backlash

P1:Precison Backlash

P2:Common Backlash

Primary Technological Functionality

Merchandise	Number of phase	Reduction Ratio	GB042	GB060	GB060A	GB090	GB090A	GB115	GB142	GB180	GB220
Rotary Inertia	1	three	.03	.16		.61		3.twenty five	nine.21	28.ninety eight	69.61
		4	.03	.14		.48		two.seventy four	7.54	23.67	54.37
		5	.03	.13		.forty seven		2.71	7.42	23.29	fifty three.27
		six	.03	.thirteen		.45		two.65	seven.25	22.75	51.72
		seven	.03	.thirteen		.forty five		2.62	seven.14	22.48	50.97
		eight	.03	.thirteen		.forty four		2.58	seven.07	22.59	50.eighty four
		nine	.03	.13		.forty four		2.57	seven.04	22.53	50.sixty three
		10	.03	.thirteen		.forty four		2.fifty seven	7.03	22.51	fifty.56
	2	fifteen	.03	.03	.thirteen	.13	.forty seven	.47	two.seventy one	seven.42	23.29
		twenty	.03	.03	.13	.13	.forty seven	.forty seven	2.seventy one	7.42	23.29
		twenty five	.03	.03	.13	.13	.47	.47	2.seventy one	7.forty two	23.29
		thirty	.03	.03	.13	.thirteen	.forty seven	.forty seven	2.seventy one	seven.forty two	23.29
		35	.03	.03	.thirteen	.thirteen	.forty seven	.47	2.seventy one	seven.forty two	23.29
		forty	.03	.03	.thirteen	.13	.forty seven	.47	two.seventy one	7.42	23.29
		45	.03	.03	.13	.thirteen	.forty seven	.forty seven	two.seventy one	seven.forty two	23.29
		50	.03	.03	.thirteen	.13	.44	.forty four	2.57	seven.03	22.51
		sixty	.03	.03	.13	.thirteen	.44	.44	2.57	seven.03	22.fifty one
		70	.03	.03	.thirteen	.thirteen	.44	.44	two.57	seven.03	22.51
		eighty	.03	.03	.13	.thirteen	.44	.forty four	two.57	seven.03	22.fifty one
		90	.03	.03	.thirteen	.thirteen	.44	.44	2.fifty seven	seven.03	22.fifty one
		a hundred	.03	.03	.13	.13	.44	.forty four	2.57	7.03	22.51

Item		Number of phase	GB042	GB060	GB060A	GB90	GB090A	GB115	GB142	GB180	GB220
Backlash(arcmin)	High Precision P0	one				≤1	≤1	≤1	≤1	≤1	≤1
	High Precision P0	two						≤3	≤3	≤3	≤3
	Precision P1	one	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3
	Precision P1	two	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	1	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	2	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7
Torsional Rigidity(N.M/arcmin)		one	3	7	seven	14	fourteen	25	50	145	225
Torsional Rigidity(N.M/arcmin)		2	three	seven	seven	fourteen	fourteen	twenty five	fifty	one hundred forty five	225
Noise(dB)		1,2	≤56	≤58	≤58	≤60	≤60	≤63	≤65	≤67	≤70
Rated enter velocity(rpm)		1,two	5000	5000	5000	4000	4000	4000	3000	3000	2000
Max enter pace(rpm)		1,two	10000	ten thousand	ten thousand	8000	8000	8000	6000	6000	4000

Noise test standard:Distance 1m,no load.Calculated with an enter speed 3000rpm

US $50
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Machinery, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Double-Step

###

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

090

010

Reducer Series Code

External Diameter

Reduction Ratio

Reducer Backlash

GB:High Precision Square Flange Output

GBR:High Precision Right Angle Square Flange Output

GE:High Precision Round Flange Output

GER:High Precision Right Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
155:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
115:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm

010 means 1:10

P0:High Precision Backlash

P1:Precison Backlash

P2:Standard Backlash

###

Item	Number of stage	Reduction Ratio	GB042	GB060	GB060A	GB090	GB090A	GB115	GB142	GB180	GB220
Rotary Inertia	1	3	0.03	0.16		0.61		3.25	9.21	28.98	69.61
		4	0.03	0.14		0.48		2.74	7.54	23.67	54.37
		5	0.03	0.13		0.47		2.71	7.42	23.29	53.27
		6	0.03	0.13		0.45		2.65	7.25	22.75	51.72
		7	0.03	0.13		0.45		2.62	7.14	22.48	50.97
		8	0.03	0.13		0.44		2.58	7.07	22.59	50.84
		9	0.03	0.13		0.44		2.57	7.04	22.53	50.63
		10	0.03	0.13		0.44		2.57	7.03	22.51	50.56
	2	15	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		20	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		25	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		30	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		35	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		40	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		45	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		50	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		60	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		70	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		80	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		90	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		100	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51

###

Item		Number of stage	GB042	GB060	GB060A	GB90	GB090A	GB115	GB142	GB180	GB220
Backlash(arcmin)	High Precision P0	1				≤1	≤1	≤1	≤1	≤1	≤1
	High Precision P0	2						≤3	≤3	≤3	≤3
	Precision P1	1	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3
	Precision P1	2	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	1	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	2	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7
Torsional Rigidity(N.M/arcmin)		1	3	7	7	14	14	25	50	145	225
Torsional Rigidity(N.M/arcmin)		2	3	7	7	14	14	25	50	145	225
Noise(dB)		1,2	≤56	≤58	≤58	≤60	≤60	≤63	≤65	≤67	≤70
Rated input speed(rpm)		1,2	5000	5000	5000	4000	4000	4000	3000	3000	2000
Max input speed(rpm)		1,2	10000	10000	10000	8000	8000	8000	6000	6000	4000

US $50
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Machinery, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Double-Step

###

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

090

010

Reducer Series Code

External Diameter

Reduction Ratio

Reducer Backlash

GB:High Precision Square Flange Output

GBR:High Precision Right Angle Square Flange Output

GE:High Precision Round Flange Output

GER:High Precision Right Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
155:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
115:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm

010 means 1:10

P0:High Precision Backlash

P1:Precison Backlash

P2:Standard Backlash

###

Item	Number of stage	Reduction Ratio	GB042	GB060	GB060A	GB090	GB090A	GB115	GB142	GB180	GB220
Rotary Inertia	1	3	0.03	0.16		0.61		3.25	9.21	28.98	69.61
		4	0.03	0.14		0.48		2.74	7.54	23.67	54.37
		5	0.03	0.13		0.47		2.71	7.42	23.29	53.27
		6	0.03	0.13		0.45		2.65	7.25	22.75	51.72
		7	0.03	0.13		0.45		2.62	7.14	22.48	50.97
		8	0.03	0.13		0.44		2.58	7.07	22.59	50.84
		9	0.03	0.13		0.44		2.57	7.04	22.53	50.63
		10	0.03	0.13		0.44		2.57	7.03	22.51	50.56
	2	15	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		20	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		25	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		30	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		35	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		40	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		45	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		50	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		60	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		70	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		80	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		90	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		100	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51

###

Item		Number of stage	GB042	GB060	GB060A	GB90	GB090A	GB115	GB142	GB180	GB220
Backlash(arcmin)	High Precision P0	1				≤1	≤1	≤1	≤1	≤1	≤1
	High Precision P0	2						≤3	≤3	≤3	≤3
	Precision P1	1	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3
	Precision P1	2	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	1	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	2	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7
Torsional Rigidity(N.M/arcmin)		1	3	7	7	14	14	25	50	145	225
Torsional Rigidity(N.M/arcmin)		2	3	7	7	14	14	25	50	145	225
Noise(dB)		1,2	≤56	≤58	≤58	≤60	≤60	≤63	≤65	≤67	≤70
Rated input speed(rpm)		1,2	5000	5000	5000	4000	4000	4000	3000	3000	2000
Max input speed(rpm)		1,2	10000	10000	10000	8000	8000	8000	6000	6000	4000

The Cyclonoidal Gearbox

Basically, the cycloidal gearbox is a gearbox that uses a cycloidal motion to perform its rotational movement. It is a very simple and efficient design that can be used in a variety of applications. A cycloidal gearbox is often used in applications that require the movement of heavy loads. It has several advantages over the planetary gearbox, including its ability to be able to handle higher loads and higher speeds. helical gearbox

Dynamic and inertial effects of a cycloidal gearbox

Several studies have been conducted on the dynamic and inertial effects of a cycloidal gearbox. Some of them focus on operating principles, while others focus on the mathematical model of the gearbox. This paper examines the mathematical model of a cycloidal gearbox, and compares its performance with the real-world measurements. It is important to have a proper mathematical model to design and control a cycloidal gearbox. A cycloidal gearbox is a two-stage gearbox with a cycloid disc and a ring gear that revolves around its own axis.
The mathematical model is made up of more than 1.6 million elements. Each gear pair is represented by a reduced model with 500 eigenmodes. The eigenfrequency for the spur gear is 70 kHz. The modally reduced model is a good fit for the cycloidal gearbox.
The mathematical model is validated using ABAQUS software. A cycloid disc was discretized to produce a very fine model. It requires 400 element points per tooth. It was also verified using static FEA. This model was then used to model the stiction of the gears in all quadrants. This is a new approach to modelling stiction in a cycloidal gearbox. It has been shown to produce results comparable to those of the EMBS model. The results are also matched by the elastic multibody simulation model. This is a good fit for the contact forces and magnitude of the cycloid gear disc. It was also found that the transmission accuracy between the cycloid gear disc and the ring gear is about 98.5%. However, this value is lower than the transmission accuracy of the ring gear pair. The transmission error of the corrected model is about 0.3%. The transmission accuracy is less because of the lower amount of elastic deformation on the tooth flanks.
It is important to note that the most accurate contact forces for each tooth of a cycloid gearbox are not smooth. The contact force on a single tooth starts with a linear rise and then ends with a sharp drop. It is not as smooth as the contact force on a point contact, which is why it has been compared to the contact force on an ellipse contact. However, the contact on an ellipse contact is still relatively small, and the EMBS model is not able to capture this.
The FE model for the cycloid disc is about 1.6 million elements. The most important part of the FE model is the discretization of the cycloid disc. It is very important to do the discretization of the cycloid gear disc very carefully because of the high degree of vibration that it experiences. The cycloid disc has to be discretized finely so that the results are comparable to those of a static FEA. It has to be the most accurate model possible in order to be able to accurately simulate the contact forces between the cycloid disc and the ring gear. helical gearbox

Kinematics of a cycloidal drive

Using an arbitrary coordinate system, we can observe the motion of components in a cycloidal gearbox. We observe that the cycloidal disc rotates around fixed pins in a circle, while the follower shaft rotates around the eccentric cam. In addition, we see that the input shaft is mounted eccentrically to the rolling-element bearing.
We also observe that the cycloidal disc rotates independently around the eccentric bearing, while the follower shaft rotates around an axis of symmetry. We can conclude that the cycloidal disc plays a pivotal role in the kinematics of a cycloidal gearbox.
To calculate the efficiency of the cycloidal reducer, we use a model that is based on the non-linear stiffness of the contacts. In this model, the non-linearity of the contact is governed by the non-linearity of the force and the deformation in the contact. We have shown that the efficiency of the cycloidal reducer increases as the load increases. In addition, the efficiency is dependent on the sliding velocity and the deformations of the normal load. These factors are considered as the key variables to determine the efficiency of the cycloidal drive.
We also consider the efficiency of the cycloidal reducer with the input torque and the input speed. We can calculate the efficiency by dividing the net torque in the ring gear by the output torque. The efficiency can be adjusted to suit different operating conditions. The efficiency of the cycloidal drive is increased as the load increases.
The cycloidal gearbox is a multi-stage gearbox with a small shaft oin and a big shaft. It has 19 teeth and brass washers. The outer discs move in opposition to the middle disc, and are offset by 180 deg. The middle disc is twice as massive as the outer disc. The cycloidal disc has nine lobes that move by one lobe per drive shaft revolution. The number of pins in the disc should be smaller than the number of pins in the surrounding pins.
The input shaft drives an eccentric bearing that is able to transmit the power to the output shaft. In addition, the input shaft applies forces to the cycloidal disk through the intermediate bearing. The cycloidal disk then advances in 360 deg/pivot/roller steps. The output shaft pins then move around in the holes to make the output shaft rotate continuously. The input shaft applies a sinusoidal motion to maintain the constant speed of the base shaft. This sine wave causes small adjustments to the follower shaft. The forces applied to the internal sleeves are a part of the equilibrium mechanism.
In addition, we can observe that the cycloidal drive is capable of transmitting a greater torque than the planetary gear. This is due to the cycloidal gear’s larger axial length and the ring gear’s smaller hole diameter. It is also possible to achieve a positive fit between the fixed ring and the disc, which is achieved by toothing between the fixed ring and the disc. The cycloidal disk is usually designed with a short cycloid to minimize unbalance forces at high speeds. helical gearbox

Comparison with planetary gearboxes

Compared to planetary gearboxes, the cycloidal gearbox has some advantages. These advantages include: low backlash, better overload capacity, a compact design, and the ability to perform in a wide range of applications. The cycloidal gearbox has become popular in the multi-axis robotics market. The gearbox is also increasingly used in first joints and positioners.
A cycloidal gearbox is a gearbox that consists of four basic components: a cycloid disk, an output flange, a ring gear, and a fixed ring. The cycloid disk is driven by an eccentric shaft, which advances in a 360deg/pivot/roller step. The output flange is a fixed pin disc that transmits the power to the output shaft. The ring gear is a fixed ring, and the input shaft is connected to a servomotor.
The cycloidal gearbox is designed to control inertia in highly dynamic situations. These gearboxes are generally used in robotics and positioners, where they are used to position heavy loads. They are also commonly used in a wide range of industrial applications. They have higher torque density and a low backlash, making them ideal for heavy loads.
The output flange is also designed to handle a torque of up to 500 Nm. Its rotational speed is lower than the planet gearbox, but its output torque is much higher. It is designed to be a high-performance gearbox, and it can be used in applications that need high ratios and a high level of torque density. The cycloid gearbox is also less expensive and has less backlash. However, the cycloidal gearbox has disadvantages that should be considered when designing a gearbox. The main problem is vibrations.
Compared to planetary gearboxes, cycloidal gearboxes have a smaller overall size and are less expensive. In addition, the cycloid gearbox has a large reduction ratio in one stage. In general, cycloidal gearboxes have single or two stages, with the third stage being less common. However, the cycloid gearbox is not the only type of gearbox that has this type of configuration. It is also common to find a planetary gearbox with a single stage.
There are several different types of cycloidal gearboxes, and they are often referred to as cycloidal speed reducers. These gearboxes are designed for any industry that uses servos. They are shorter than planetary gearboxes, and they are larger in diameter for the same torque. Some of them are also available with a ratio lower than 30:1.
The cycloid gearbox can be a good choice for applications where there are high rotational speeds and high torque requirements. These gearboxes are also more compact than planetary gearboxes, and are suitable for high-torque applications. In addition, they are more robust and can handle shock loads. They also have low backlash, and a higher level of accuracy and positioning accuracy. They are also used in a wide range of applications, including industrial robotics.
China Automatic Power Transmission Reducer Precision Planetary Gearbox for Gear Motors cycloidal drive generator
editor by czh 2023-01-01